# Kubo command-line

Generated on 2023-10-05 18:30:12, from kubo 0.23.0

This document was autogenerated from CLI help text in kubo 0.23.0 (opens new window) For issues and support, check out the generate-cli-docs.sh (opens new window) script on GitHub.

IPFS can run in either online or offline mode. Online mode is when you have IPFS running separately as a daemon process. If you do not have an IPFS daemon running, you are in offline mode. Some commands, like ipfs swarm peers, are only supported when online.

The command-line quickstart guide explains how to start the IPFS daemon and take your node online.

# Alignment with Kubo RPC API

Every command usable from the CLI is also available through the RPC API v0. For example:

> ipfs swarm peers
/ip4/104.131.131.82/tcp/4001/p2p/QmaCpDMGvV2BGHeYERUEnRQAwe3N8SzbUtfsmvsqQLuvuJ
/ip4/104.236.151.122/tcp/4001/p2p/QmSoLju6m7xTh3DuokvT3886QRYqxAzb1kShaanJgW36yx
/ip4/104.236.176.52/tcp/4001/p2p/QmSoLnSGccFuZQJzRadHn95W2CrSFmZuTdDWP8HXaHca9z

> curl -X POST http://127.0.0.1:5001/api/v0/swarm/peers
{
  "Strings": [
    "/ip4/104.131.131.82/tcp/4001/p2p/QmaCpDMGvV2BGHeYERUEnRQAwe3N8SzbUtfsmvsqQLuvuJ",
    "/ip4/104.236.151.122/tcp/4001/p2p/QmSoLju6m7xTh3DuokvT3886QRYqxAzb1kShaanJgW36yx",
    "/ip4/104.236.176.52/tcp/4001/p2p/QmSoLnSGccFuZQJzRadHn95W2CrSFmZuTdDWP8HXaHca9z",
  ]
}

# ipfs

USAGE
  ipfs  - Global p2p merkle-dag filesystem.

SYNOPSIS
  ipfs [--config=<config> | -c] [--debug | -D] [--help] [-h] [--api=<api>] [--offline] [--cid-base=<base>] [--upgrade-cidv0-in-output] [--encoding=<encoding> | --enc] [--timeout=<timeout>] <command> ...

OPTIONS

  --repo-dir                 string - Path to the repository directory to use.
  --config-file              string - Path to the configuration file to use.
  -c, --config               string - [DEPRECATED] Path to the configuration
                                      file to use.
  -D, --debug                bool   - Operate in debug mode.
  --help                     bool   - Show the full command help text.
  -h                         bool   - Show a short version of the command help
                                      text.
  -L, --local                bool   - Run the command locally, instead of using
                                      the daemon. DEPRECATED: use --offline.
  --offline                  bool   - Run the command offline.
  --api                      string - Use a specific API instance (defaults to
                                      /ip4/127.0.0.1/tcp/5001).
  --cid-base                 string - Multibase encoding used for version 1
                                      CIDs in output.
  --upgrade-cidv0-in-output  bool   - Upgrade version 0 to version 1 CIDs in
                                      output.
  --enc, --encoding          string - The encoding type the output should be
                                      encoded with (json, xml, or text).
                                      Default: text.
  --stream-channels          bool   - Stream channel output.
  --timeout                  string - Set a global timeout on the command.

SUBCOMMANDS
  BASIC COMMANDS
    init          Initialize local IPFS configuration
    add <path>    Add a file to IPFS
    cat <ref>     Show IPFS object data
    get <ref>     Download IPFS objects
    ls <ref>      List links from an object
    refs <ref>    List hashes of links from an object
  
  DATA STRUCTURE COMMANDS
    dag           Interact with IPLD DAG nodes
    files         Interact with files as if they were a unix filesystem
    block         Interact with raw blocks in the datastore
  
  TEXT ENCODING COMMANDS
    cid           Convert and discover properties of CIDs
    multibase     Encode and decode data with Multibase format
  
  ADVANCED COMMANDS
    daemon        Start a long-running daemon process
    shutdown      Shut down the daemon process
    resolve       Resolve any type of content path
    name          Publish and resolve IPNS names
    key           Create and list IPNS name keypairs
    pin           Pin objects to local storage
    repo          Manipulate the IPFS repository
    stats         Various operational stats
    p2p           Libp2p stream mounting (experimental)
    filestore     Manage the filestore (experimental)
    mount         Mount an IPFS read-only mount point (experimental)
  
  NETWORK COMMANDS
    id            Show info about IPFS peers
    bootstrap     Add or remove bootstrap peers
    swarm         Manage connections to the p2p network
    dht           Query the DHT for values or peers
    routing       Issue routing commands
    ping          Measure the latency of a connection
    bitswap       Inspect bitswap state
    pubsub        Send and receive messages via pubsub
  
  TOOL COMMANDS
    config        Manage configuration
    version       Show IPFS version information
    diag          Generate diagnostic reports
    update        Download and apply go-ipfs updates
    commands      List all available commands
    log           Manage and show logs of running daemon
  
  Use 'ipfs <command> --help' to learn more about each command.
  
  ipfs uses a repository in the local file system. By default, the repo is
  located at ~/.ipfs. To change the repo location, set the $IPFS_PATH
  environment variable:
  
    export IPFS_PATH=/path/to/ipfsrepo
  
  EXIT STATUS
  
  The CLI will exit with one of the following values:
  
  0     Successful execution.
  1     Failed executions.

  For more information about each command, use:
  'ipfs <subcmd> --help'


# ipfs add

USAGE
  ipfs add <path>... - Add a file or directory to IPFS.

SYNOPSIS
  ipfs add [--recursive | -r] [--dereference-args] [--stdin-name=<stdin-name>]
           [--hidden | -H] [--ignore=<ignore>]...
           [--ignore-rules-path=<ignore-rules-path>] [--quiet | -q]
           [--quieter | -Q] [--silent] [--progress | -p] [--trickle | -t]
           [--only-hash | -n] [--wrap-with-directory | -w]
           [--chunker=<chunker> | -s] [--raw-leaves] [--nocopy] [--fscache]
           [--cid-version=<cid-version>] [--hash=<hash>] [--inline]
           [--inline-limit=<inline-limit>] [--pin=false] [--to-files=<to-files>]
           [--] <path>...

ARGUMENTS

  <path>... - The path to a file to be added to IPFS.

OPTIONS

  -r, --recursive            bool   - Add directory paths recursively.
  --dereference-args         bool   - Symlinks supplied in arguments are
                                      dereferenced.
  --stdin-name               string - Assign a name if the file source is stdin.
  -H, --hidden               bool   - Include files that are hidden. Only takes
                                      effect on recursive add.
  --ignore                   array  - A rule (.gitignore-stype) defining which
                                      file(s) should be ignored (variadic,
                                      experimental).
  --ignore-rules-path        string - A path to a file with .gitignore-style
                                      ignore rules (experimental).
  -q, --quiet                bool   - Write minimal output.
  -Q, --quieter              bool   - Write only final hash.
  --silent                   bool   - Write no output.
  -p, --progress             bool   - Stream progress data.
  -t, --trickle              bool   - Use trickle-dag format for dag generation.
  -n, --only-hash            bool   - Only chunk and hash - do not write to
                                      disk.
  -w, --wrap-with-directory  bool   - Wrap files with a directory object.
  -s, --chunker              string - Chunking algorithm, size-[bytes],
                                      rabin-[min]-[avg]-[max] or buzhash.
                                      Default: size-262144.
  --raw-leaves               bool   - Use raw blocks for leaf nodes.
  --nocopy                   bool   - Add the file using filestore. Implies
                                      raw-leaves. (experimental).
  --fscache                  bool   - Check the filestore for pre-existing
                                      blocks. (experimental).
  --cid-version              int    - CID version. Defaults to 0 unless an
                                      option that depends on CIDv1 is passed.
                                      Passing version 1 will cause the
                                      raw-leaves option to default to true.
  --hash                     string - Hash function to use. Implies CIDv1 if
                                      not sha2-256. (experimental). Default:
                                      sha2-256.
  --inline                   bool   - Inline small blocks into CIDs.
                                      (experimental).
  --inline-limit             int    - Maximum block size to inline.
                                      (experimental). Default: 32.
  --pin                      bool   - Pin locally to protect added files from
                                      garbage collection. Default: true.
  --to-files                 string - Add reference to Files API (MFS) at the
                                      provided path.

DESCRIPTION

  Adds the content of <path> to IPFS. Use -r to add directories.
  Note that directories are added recursively, to form the IPFS
  MerkleDAG.
  
  If the daemon is not running, it will just add locally.
  If the daemon is started later, it will be advertised after a few
  seconds when the reprovider runs.
  
  The wrap option, '-w', wraps the file (or files, if using the
  recursive option) in a directory. This directory contains only
  the files which have been added, and means that the file retains
  its filename. For example:
  
    > ipfs add example.jpg
    added QmbFMke1KXqnYyBBWxB74N4c5SBnJMVAiMNRcGu6x1AwQH example.jpg
    > ipfs add example.jpg -w
    added QmbFMke1KXqnYyBBWxB74N4c5SBnJMVAiMNRcGu6x1AwQH example.jpg
    added QmaG4FuMqEBnQNn3C8XJ5bpW8kLs7zq2ZXgHptJHbKDDVx
  
  You can now refer to the added file in a gateway, like so:
  
    /ipfs/QmaG4FuMqEBnQNn3C8XJ5bpW8kLs7zq2ZXgHptJHbKDDVx/example.jpg
  
  Files imported with 'ipfs add' are protected from GC (implicit '--pin=true'),
  but it is up to you to remember the returned CID to get the data back later.
  
  Passing '--to-files' creates a reference in Files API (MFS), making it easier
  to find it in the future:
  
    > ipfs files mkdir -p /myfs/dir
    > ipfs add example.jpg --to-files /myfs/dir/
    > ipfs files ls /myfs/dir/
    example.jpg
  
  See 'ipfs files --help' to learn more about using MFS
  for keeping track of added files and directories.
  
  The chunker option, '-s', specifies the chunking strategy that dictates
  how to break files into blocks. Blocks with same content can
  be deduplicated. Different chunking strategies will produce different
  hashes for the same file. The default is a fixed block size of
  256 * 1024 bytes, 'size-262144'. Alternatively, you can use the
  Buzhash or Rabin fingerprint chunker for content defined chunking by
  specifying buzhash or rabin-[min]-[avg]-[max] (where min/avg/max refer
  to the desired chunk sizes in bytes), e.g. 'rabin-262144-524288-1048576'.
  
  The following examples use very small byte sizes to demonstrate the
  properties of the different chunkers on a small file. You'll likely
  want to use a 1024 times larger chunk sizes for most files.
  
    > ipfs add --chunker=size-2048 ipfs-logo.svg
    added QmafrLBfzRLV4XSH1XcaMMeaXEUhDJjmtDfsYU95TrWG87 ipfs-logo.svg
    > ipfs add --chunker=rabin-512-1024-2048 ipfs-logo.svg
    added Qmf1hDN65tR55Ubh2RN1FPxr69xq3giVBz1KApsresY8Gn ipfs-logo.svg
  
  You can now check what blocks have been created by:
  
    > ipfs object links QmafrLBfzRLV4XSH1XcaMMeaXEUhDJjmtDfsYU95TrWG87
    QmY6yj1GsermExDXoosVE3aSPxdMNYr6aKuw3nA8LoWPRS 2059
    Qmf7ZQeSxq2fJVJbCmgTrLLVN9tDR9Wy5k75DxQKuz5Gyt 1195
    > ipfs object links Qmf1hDN65tR55Ubh2RN1FPxr69xq3giVBz1KApsresY8Gn
    QmY6yj1GsermExDXoosVE3aSPxdMNYr6aKuw3nA8LoWPRS 2059
    QmerURi9k4XzKCaaPbsK6BL5pMEjF7PGphjDvkkjDtsVf3 868
    QmQB28iwSriSUSMqG2nXDTLtdPHgWb4rebBrU7Q1j4vxPv 338
  
  Finally, a note on hash (CID) determinism and 'ipfs add' command.
  
  Almost all the flags provided by this command will change the final CID, and
  new flags may be added in the future. It is not guaranteed for the implicit
  defaults of 'ipfs add' to remain the same in future Kubo releases, or for other
  IPFS software to use the same import parameters as Kubo.
  
  If you need to back up or transport content-addressed data using a non-IPFS
  medium, CID can be preserved with CAR files.
  See 'dag export' and 'dag import' for more information.


# ipfs bitswap

USAGE
  ipfs bitswap - Interact with the bitswap agent.

SYNOPSIS
  ipfs bitswap

SUBCOMMANDS
  ipfs bitswap ledger <peer> - Show the current ledger for a peer.
  ipfs bitswap reprovide     - Trigger reprovider.
  ipfs bitswap stat          - Show some diagnostic information on the bitswap
                               agent.
  ipfs bitswap wantlist      - Show blocks currently on the wantlist.

  For more information about each command, use:
  'ipfs bitswap <subcmd> --help'


# ipfs bitswap ledger

USAGE
  ipfs bitswap ledger <peer> - Show the current ledger for a peer.

SYNOPSIS
  ipfs bitswap ledger [--] <peer>

ARGUMENTS

  <peer> - The PeerID (B58) of the ledger to inspect.

DESCRIPTION

  The Bitswap decision engine tracks the number of bytes exchanged between IPFS
  nodes, and stores this information as a collection of ledgers. This command
  prints the ledger associated with a given peer.


# ipfs bitswap reprovide

USAGE
  ipfs bitswap reprovide - Trigger reprovider.

SYNOPSIS
  ipfs bitswap reprovide

DESCRIPTION

  Trigger reprovider to announce our data to network.


# ipfs bitswap stat

USAGE
  ipfs bitswap stat - Show some diagnostic information on the bitswap agent.

SYNOPSIS
  ipfs bitswap stat [--verbose | -v] [--human]

OPTIONS

  -v, --verbose  bool - Print extra information.
  --human        bool - Print sizes in human readable format (e.g., 1K 234M 2G).


# ipfs bitswap wantlist

USAGE
  ipfs bitswap wantlist - Show blocks currently on the wantlist.

SYNOPSIS
  ipfs bitswap wantlist [--peer=<peer> | -p]

OPTIONS

  -p, --peer  string - Specify which peer to show wantlist for. Default: self.

DESCRIPTION

  Print out all blocks currently on the bitswap wantlist for the local peer.


# ipfs block

USAGE
  ipfs block - Interact with raw IPFS blocks.

SYNOPSIS
  ipfs block

DESCRIPTION

  'ipfs block' is a plumbing command used to manipulate raw IPFS blocks.
  Reads from stdin or writes to stdout. A block is identified by a Multihash
  passed with a valid CID.

SUBCOMMANDS
  ipfs block get <cid>     - Get a raw IPFS block.
  ipfs block put <data>... - Store input as an IPFS block.
  ipfs block rm <cid>...   - Remove IPFS block(s) from the local datastore.
  ipfs block stat <cid>    - Print information of a raw IPFS block.

  For more information about each command, use:
  'ipfs block <subcmd> --help'


# ipfs block get

USAGE
  ipfs block get <cid> - Get a raw IPFS block.

SYNOPSIS
  ipfs block get [--] <cid>

ARGUMENTS

  <cid> - The CID of an existing block to get.

DESCRIPTION

  'ipfs block get' is a plumbing command for retrieving raw IPFS blocks.
  It takes a <cid>, and outputs the block to stdout.


# ipfs block put

USAGE
  ipfs block put <data>... - Store input as an IPFS block.

SYNOPSIS
  ipfs block put [--cid-codec=<cid-codec>] [--mhtype=<mhtype>] [--mhlen=<mhlen>]
                 [--pin] [--allow-big-block] [--format=<format> | -f] [--]
                 <data>...

ARGUMENTS

  <data>... - The data to be stored as an IPFS block.

OPTIONS

  --cid-codec        string - Multicodec to use in returned CID. Default: raw.
  --mhtype           string - Multihash hash function. Default: sha2-256.
  --mhlen            int    - Multihash hash length. Default: -1.
  --pin              bool   - Pin added blocks recursively. Default: false.
  --allow-big-block  bool   - Disable block size check and allow creation of
                              blocks bigger than 1MiB. WARNING: such blocks
                              won't be transferable over the standard bitswap.
                              Default: false.
  -f, --format       string - Use legacy format for returned CID (DEPRECATED).

DESCRIPTION

  'ipfs block put' is a plumbing command for storing raw IPFS blocks.
  It reads data from stdin, and outputs the block's CID to stdout.
  
  Unless cid-codec is specified, this command returns raw (0x55) CIDv1 CIDs.
  
  Passing alternative --cid-codec does not modify imported data, nor run any
  validation. It is provided solely for convenience for users who create blocks
  in userland.
  
  NOTE:
  Do not use --format for any new code. It got superseded by --cid-codec and left
  only for backward compatibility when a legacy CIDv0 is required (--format=v0).


# ipfs block rm

USAGE
  ipfs block rm <cid>... - Remove IPFS block(s) from the local datastore.

SYNOPSIS
  ipfs block rm [--force | -f] [--quiet | -q] [--] <cid>...

ARGUMENTS

  <cid>... - CIDs of block(s) to remove.

OPTIONS

  -f, --force  bool - Ignore nonexistent blocks.
  -q, --quiet  bool - Write minimal output.

DESCRIPTION

  'ipfs block rm' is a plumbing command for removing raw ipfs blocks.
  It takes a list of CIDs to remove from the local datastore..


# ipfs block stat

USAGE
  ipfs block stat <cid> - Print information of a raw IPFS block.

SYNOPSIS
  ipfs block stat [--] <cid>

ARGUMENTS

  <cid> - The CID of an existing block to stat.

DESCRIPTION

  'ipfs block stat' is a plumbing command for retrieving information
  on raw IPFS blocks. It outputs the following to stdout:
  
  	Key  - the CID of the block
  	Size - the size of the block in bytes


# ipfs bootstrap

USAGE
  ipfs bootstrap - Show or edit the list of bootstrap peers.

SYNOPSIS
  ipfs bootstrap

DESCRIPTION

  Running 'ipfs bootstrap' with no arguments will run 'ipfs bootstrap list'.
  
  SECURITY WARNING:
  
  The bootstrap command manipulates the "bootstrap list", which contains
  the addresses of bootstrap nodes. These are the *trusted peers* from
  which to learn about other peers in the network. Only edit this list
  if you understand the risks of adding or removing nodes from this list.

SUBCOMMANDS
  ipfs bootstrap add [<peer>]... - Add peers to the bootstrap list.
  ipfs bootstrap list            - Show peers in the bootstrap list.
  ipfs bootstrap rm [<peer>]...  - Remove peers from the bootstrap list.

  For more information about each command, use:
  'ipfs bootstrap <subcmd> --help'


# ipfs bootstrap add

USAGE
  ipfs bootstrap add [<peer>]... - Add peers to the bootstrap list.

SYNOPSIS
  ipfs bootstrap add [--default] [--] [<peer>...]

ARGUMENTS

  [<peer>]... - A peer to add to the bootstrap list (in the format
                '<multiaddr>/<peerID>')

OPTIONS

  --default  bool - Add default bootstrap nodes. (Deprecated, use 'default'
                    subcommand instead).

DESCRIPTION

  Outputs a list of peers that were added (that weren't already
  in the bootstrap list).
  
  SECURITY WARNING:
  
  The bootstrap command manipulates the "bootstrap list", which contains
  the addresses of bootstrap nodes. These are the *trusted peers* from
  which to learn about other peers in the network. Only edit this list
  if you understand the risks of adding or removing nodes from this list.

SUBCOMMANDS
  ipfs bootstrap add default - Add default peers to the bootstrap list.

  For more information about each command, use:
  'ipfs bootstrap add <subcmd> --help'


# ipfs bootstrap add default

USAGE
  ipfs bootstrap add default - Add default peers to the bootstrap list.

SYNOPSIS
  ipfs bootstrap add default

DESCRIPTION

  Outputs a list of peers that were added (that weren't already
  in the bootstrap list).


# ipfs bootstrap list

USAGE
  ipfs bootstrap list - Show peers in the bootstrap list.

SYNOPSIS
  ipfs bootstrap list

DESCRIPTION

  Peers are output in the format '<multiaddr>/<peerID>'.


# ipfs bootstrap rm

USAGE
  ipfs bootstrap rm [<peer>]... - Remove peers from the bootstrap list.

SYNOPSIS
  ipfs bootstrap rm [--all] [--] [<peer>...]

ARGUMENTS

  [<peer>]... - A peer to add to the bootstrap list (in the format
                '<multiaddr>/<peerID>')

OPTIONS

  --all  bool - Remove all bootstrap peers. (Deprecated, use 'all' subcommand).

DESCRIPTION

  Outputs the list of peers that were removed.
  
  SECURITY WARNING:
  
  The bootstrap command manipulates the "bootstrap list", which contains
  the addresses of bootstrap nodes. These are the *trusted peers* from
  which to learn about other peers in the network. Only edit this list
  if you understand the risks of adding or removing nodes from this list.

SUBCOMMANDS
  ipfs bootstrap rm all - Remove all peers from the bootstrap list.

  For more information about each command, use:
  'ipfs bootstrap rm <subcmd> --help'


# ipfs bootstrap rm all

USAGE
  ipfs bootstrap rm all - Remove all peers from the bootstrap list.

SYNOPSIS
  ipfs bootstrap rm all

DESCRIPTION

  Outputs the list of peers that were removed.


# ipfs cat

USAGE
  ipfs cat <ipfs-path>... - Show IPFS object data.

SYNOPSIS
  ipfs cat [--offset=<offset> | -o] [--length=<length> | -l] [--progress=false]
           [--] <ipfs-path>...

ARGUMENTS

  <ipfs-path>... - The path to the IPFS object(s) to be outputted.

OPTIONS

  -o, --offset    int64 - Byte offset to begin reading from.
  -l, --length    int64 - Maximum number of bytes to read.
  -p, --progress  bool  - Stream progress data. Default: true.

DESCRIPTION

  Displays the data contained by an IPFS or IPNS object(s) at the given path.


# ipfs cid

USAGE
  ipfs cid - Convert and discover properties of CIDs

SYNOPSIS
  ipfs cid

SUBCOMMANDS
  ipfs cid base32 <cid>... - Convert CIDs to Base32 CID version 1.
  ipfs cid bases           - List available multibase encodings.
  ipfs cid codecs          - List available CID multicodecs.
  ipfs cid format <cid>... - Format and convert a CID in various useful ways.
  ipfs cid hashes          - List available multihashes.

  For more information about each command, use:
  'ipfs cid <subcmd> --help'


# ipfs cid base32

USAGE
  ipfs cid base32 <cid>... - Convert CIDs to Base32 CID version 1.

SYNOPSIS
  ipfs cid base32 [--] <cid>...

ARGUMENTS

  <cid>... - CIDs to convert.

DESCRIPTION

  'ipfs cid base32' normalizes passed CIDs to their canonical case-insensitive encoding.
  Useful when processing third-party CIDs which could come with arbitrary formats.


# ipfs cid bases

USAGE
  ipfs cid bases - List available multibase encodings.

SYNOPSIS
  ipfs cid bases [--prefix] [--numeric]

OPTIONS

  --prefix   bool - also include the single letter prefixes in addition to the
                    code.
  --numeric  bool - also include numeric codes.

DESCRIPTION

  'ipfs cid bases' relies on https://github.com/multiformats/go-multibase


# ipfs cid codecs

USAGE
  ipfs cid codecs - List available CID multicodecs.

SYNOPSIS
  ipfs cid codecs [--numeric | -n] [--supported | -s]

OPTIONS

  -n, --numeric    bool - also include numeric codes.
  -s, --supported  bool - list only codecs supported by go-ipfs commands.

DESCRIPTION

  'ipfs cid codecs' relies on https://github.com/multiformats/go-multicodec


# ipfs cid format

USAGE
  ipfs cid format <cid>... - Format and convert a CID in various useful ways.

SYNOPSIS
  ipfs cid format [-f=<f>] [-v=<v>] [--mc=<mc>] [-b=<b>] [--] <cid>...

ARGUMENTS

  <cid>... - CIDs to format.

OPTIONS

  -f    string - Printf style format string. Default: %s.
  -v    string - CID version to convert to.
  --mc  string - CID multicodec to convert to.
  -b    string - Multibase to display CID in.

DESCRIPTION

  Format and converts <cid>'s in various useful ways.
  
  The optional format string is a printf style format string:
  
     %% literal %
     %b multibase name
     %B multibase code
     %v version string
     %V version number
     %c codec name
     %C codec code
     %h multihash name
     %H multihash code
     %L hash digest length
     %m multihash encoded in base %b (with multibase prefix)
     %M multihash encoded in base %b without multibase prefix
     %d hash digest encoded in base %b (with multibase prefix)
     %D hash digest encoded in base %b without multibase prefix
     %s cid string encoded in base %b (1)
     %S cid string encoded in base %b without multibase prefix
     %P cid prefix: %v-%c-%h-%L
  
  (1) For CID version 0 the multibase must be base58btc and no prefix is
  used.  For Cid version 1 the multibase prefix is included.


# ipfs cid hashes

USAGE
  ipfs cid hashes - List available multihashes.

SYNOPSIS
  ipfs cid hashes [--numeric | -n] [--supported | -s]

OPTIONS

  -n, --numeric    bool - also include numeric codes.
  -s, --supported  bool - list only codecs supported by go-ipfs commands.

DESCRIPTION

  'ipfs cid hashes' relies on https://github.com/multiformats/go-multihash


# ipfs commands

USAGE
  ipfs commands - List all available commands.

SYNOPSIS
  ipfs commands [--flags | -f]

OPTIONS

  -f, --flags  bool - Show command flags.

DESCRIPTION

  Lists all available commands (and subcommands) and exits.

SUBCOMMANDS
  ipfs commands completion - Generate shell completions.

  For more information about each command, use:
  'ipfs commands <subcmd> --help'


# ipfs commands completion

USAGE
  ipfs commands completion - Generate shell completions.

SYNOPSIS
  ipfs commands completion

SUBCOMMANDS
  ipfs commands completion bash - Generate bash shell completions.
  ipfs commands completion fish - Generate fish shell completions.
  ipfs commands completion zsh  - Generate zsh shell completions.

  For more information about each command, use:
  'ipfs commands completion <subcmd> --help'


# ipfs commands completion bash

USAGE
  ipfs commands completion bash - Generate bash shell completions.

SYNOPSIS
  ipfs commands completion bash

DESCRIPTION

  Generates command completions for the bash shell.
  
  The simplest way to see it working is write the completions
  to a file and then source it:
  
    > ipfs commands completion bash > ipfs-completion.bash
    > source ./ipfs-completion.bash
  
  To install the completions permanently, they can be moved to
  /etc/bash_completion.d or sourced from your ~/.bashrc file.


# ipfs commands completion fish

USAGE
  ipfs commands completion fish - Generate fish shell completions.

SYNOPSIS
  ipfs commands completion fish

DESCRIPTION

  Generates command completions for the fish shell.
  
  The simplest way to see it working is write the completions
  to a file and then source it:
  
    > ipfs commands completion fish > ipfs-completion.fish
    > source ./ipfs-completion.fish
  
  To install the completions permanently, they can be moved to
  /etc/fish/completions or ~/.config/fish/completions or sourced from your ~/.config/fish/config.fish file.


# ipfs commands completion zsh

USAGE
  ipfs commands completion zsh - Generate zsh shell completions.

SYNOPSIS
  ipfs commands completion zsh

DESCRIPTION

  Generates command completions for the zsh shell.
  
  The simplest way to see it working is write the completions
  to a file and then source it:
  
    > ipfs commands completion zsh > ipfs-completion.zsh
    > source ./ipfs-completion.zsh
  
  To install the completions permanently, they can be moved to
  /etc/zsh/completions or sourced from your ~/.zshrc file.


# ipfs config

USAGE
  ipfs config <key> [<value>] - Get and set IPFS config values.

SYNOPSIS
  ipfs config [--bool] [--json] [--] <key> [<value>]

ARGUMENTS

  <key>     - The key of the config entry (e.g. "Addresses.API").
  [<value>] - The value to set the config entry to.

OPTIONS

  --bool  bool - Set a boolean value.
  --json  bool - Parse stringified JSON.

DESCRIPTION

  'ipfs config' controls configuration variables. It works
  much like 'git config'. The configuration values are stored in a config
  file inside your IPFS repository (IPFS_PATH).
  
  Examples:
  
  Get the value of the 'Datastore.Path' key:
  
    $ ipfs config Datastore.Path
  
  Set the value of the 'Datastore.Path' key:
  
    $ ipfs config Datastore.Path ~/.ipfs/datastore

SUBCOMMANDS
  ipfs config edit           - Open the config file for editing in $EDITOR.
  ipfs config profile        - Apply profiles to config.
  ipfs config replace <file> - Replace the config with <file>.
  ipfs config show           - Output config file contents.

  For more information about each command, use:
  'ipfs config <subcmd> --help'


# ipfs config edit

USAGE
  ipfs config edit - Open the config file for editing in $EDITOR.

SYNOPSIS
  ipfs config edit

DESCRIPTION

  To use 'ipfs config edit', you must have the $EDITOR environment
  variable set to your preferred text editor.


# ipfs config profile

USAGE
  ipfs config profile - Apply profiles to config.

SYNOPSIS
  ipfs config profile

DESCRIPTION

  Available profiles:
    'lowpower':
      Reduces daemon overhead on the system. May affect node
      functionality - performance of content discovery and data
      fetching may be degraded.
      
    'randomports':
      Use a random port number for swarm.
    'badgerds':
      Configures the node to use the experimental badger datastore.
      
      Use this datastore if some aspects of performance, 
      especially the speed of adding many gigabytes of files, are critical.
      However, be aware that:
      
      * This datastore will not properly reclaim space when your datastore is
        smaller than several gigabytes.  If you run IPFS with --enable-gc, you plan
        on storing very little data in your IPFS node, and disk usage is more
        critical than performance, consider using flatfs.
      * This datastore uses up to several gigabytes of memory.  
      * Good for medium-size datastores, but may run into performance issues
        if your dataset is bigger than a terabyte.
      * The current implementation is based on old badger 1.x
        which is no longer supported by the upstream team.
      
      This profile may only be applied when first initializing the node.
    'server':
      Disables local host discovery, recommended when
      running IPFS on machines with public IPv4 addresses.
    'local-discovery':
      Sets default values to fields affected by the server
      profile, enables discovery in local networks.
    'test':
      Reduces external interference of IPFS daemon, this
      is useful when using the daemon in test environments.
    'default-networking':
      Restores default network settings.
      Inverse profile of the test profile.
    'default-datastore':
      Configures the node to use the default datastore (flatfs).
      
      Read the "flatfs" profile description for more information on this datastore.
      
      This profile may only be applied when first initializing the node.
      
    'flatfs':
      Configures the node to use the flatfs datastore.
      
      This is the most battle-tested and reliable datastore. 
      You should use this datastore if:
      
      * You need a very simple and very reliable datastore, and you trust your
        filesystem. This datastore stores each block as a separate file in the
        underlying filesystem so it's unlikely to loose data unless there's an issue
        with the underlying file system.
      * You need to run garbage collection in a way that reclaims free space as soon as possible.
      * You want to minimize memory usage.
      * You are ok with the default speed of data import, or prefer to use --nocopy.
      
      This profile may only be applied when first initializing the node.
      

SUBCOMMANDS
  ipfs config profile apply <profile> - Apply profile to config.

  For more information about each command, use:
  'ipfs config profile <subcmd> --help'


# ipfs config profile apply

USAGE
  ipfs config profile apply <profile> - Apply profile to config.

SYNOPSIS
  ipfs config profile apply [--dry-run] [--] <profile>

ARGUMENTS

  <profile> - The profile to apply to the config.

OPTIONS

  --dry-run  bool - print difference between the current config and the config
                    that would be generated.


# ipfs config replace

USAGE
  ipfs config replace <file> - Replace the config with <file>.

SYNOPSIS
  ipfs config replace [--] <file>

ARGUMENTS

  <file> - The file to use as the new config.

DESCRIPTION

  Make sure to back up the config file first if necessary, as this operation
  can't be undone.


# ipfs config show

USAGE
  ipfs config show - Output config file contents.

SYNOPSIS
  ipfs config show

DESCRIPTION

  NOTE: For security reasons, this command will omit your private key and remote services. If you would like to make a full backup of your config (private key included), you must copy the config file from your repo.


# ipfs daemon

USAGE
  ipfs daemon - Run a network-connected IPFS node.

SYNOPSIS
  ipfs daemon [--init] [--init-config=<init-config>]
              [--init-profile=<init-profile>] [--routing=<routing>] [--mount]
              [--writable] [--mount-ipfs=<mount-ipfs>]
              [--mount-ipns=<mount-ipns>] [--unrestricted-api]
              [--disable-transport-encryption] [--enable-gc]
              [--manage-fdlimit=false] [--migrate] [--enable-pubsub-experiment]
              [--enable-namesys-pubsub] [--enable-mplex-experiment]
              [--agent-version-suffix=<agent-version-suffix>]

OPTIONS

  --init                          bool   - Initialize ipfs with default
                                           settings if not already initialized.
  --init-config                   string - Path to existing configuration file
                                           to be loaded during --init.
  --init-profile                  string - Configuration profiles to apply for
                                           --init. See ipfs init --help for
                                           more.
  --routing                       string - Overrides the routing option.
                                           Default: default.
  --mount                         bool   - Mounts IPFS to the filesystem using
                                           FUSE (experimental).
  --writable                      bool   - Enable legacy Gateway.Writable
                                           (REMOVED).
  --mount-ipfs                    string - Path to the mountpoint for IPFS (if
                                           using --mount). Defaults to config
                                           setting.
  --mount-ipns                    string - Path to the mountpoint for IPNS (if
                                           using --mount). Defaults to config
                                           setting.
  --unrestricted-api              bool   - Allow API access to unlisted hashes.
  --disable-transport-encryption  bool   - Disable transport encryption (for
                                           debugging protocols).
  --enable-gc                     bool   - Enable automatic periodic repo
                                           garbage collection.
  --manage-fdlimit                bool   - Check and raise file descriptor
                                           limits if needed. Default: true.
  --migrate                       bool   - If true, assume yes at the migrate
                                           prompt. If false, assume no.
  --enable-pubsub-experiment      bool   - DEPRECATED.
  --enable-namesys-pubsub         bool   - Enable IPNS over pubsub. Implicitly
                                           enables pubsub, overrides
                                           Ipns.UsePubsub config.
  --enable-mplex-experiment       bool   - DEPRECATED.
  --agent-version-suffix          string - Optional suffix to the AgentVersion
                                           presented by `ipfs id` and also
                                           advertised through BitSwap.

DESCRIPTION

  The daemon will start listening on ports on the network, which are
  documented in (and can be modified through) 'ipfs config Addresses'.
  For example, to change the 'Gateway' port:
  
    ipfs config Addresses.Gateway /ip4/127.0.0.1/tcp/8082
  
  The RPC API address can be changed the same way:
  
    ipfs config Addresses.API /ip4/127.0.0.1/tcp/5002
  
  Make sure to restart the daemon after changing addresses.
  
  By default, the gateway is only accessible locally. To expose it to
  other computers in the network, use 0.0.0.0 as the ip address:
  
    ipfs config Addresses.Gateway /ip4/0.0.0.0/tcp/8080
  
  Be careful if you expose the RPC API. It is a security risk, as anyone could
  control your node remotely. If you need to control the node remotely,
  make sure to protect the port as you would other services or database
  (firewall, authenticated proxy, etc).
  
  HTTP Headers
  
  ipfs supports passing arbitrary headers to the RPC API and Gateway. You can
  do this by setting headers on the API.HTTPHeaders and Gateway.HTTPHeaders
  keys:
  
    ipfs config --json API.HTTPHeaders.X-Special-Header "[\"so special :)\"]"
    ipfs config --json Gateway.HTTPHeaders.X-Special-Header "[\"so special :)\"]"
  
  Note that the value of the keys is an _array_ of strings. This is because
  headers can have more than one value, and it is convenient to pass through
  to other libraries.
  
  CORS Headers (for API)
  
  You can setup CORS headers the same way:
  
    ipfs config --json API.HTTPHeaders.Access-Control-Allow-Origin "[\"example.com\"]"
    ipfs config --json API.HTTPHeaders.Access-Control-Allow-Methods "[\"PUT\", \"GET\", \"POST\"]"
    ipfs config --json API.HTTPHeaders.Access-Control-Allow-Credentials "[\"true\"]"
  
  Shutdown
  
  To shut down the daemon, send a SIGINT signal to it (e.g. by pressing 'Ctrl-C')
  or send a SIGTERM signal to it (e.g. with 'kill'). It may take a while for the
  daemon to shutdown gracefully, but it can be killed forcibly by sending a
  second signal.
  
  IPFS_PATH environment variable
  
  ipfs uses a repository in the local file system. By default, the repo is
  located at ~/.ipfs. To change the repo location, set the $IPFS_PATH
  environment variable:
  
    export IPFS_PATH=/path/to/ipfsrepo
  
  DEPRECATION NOTICE
  
  Previously, ipfs used an environment variable as seen below:
  
    export API_ORIGIN="http://localhost:8888/"
  
  This is deprecated. It is still honored in this version, but will be removed
  in a future version, along with this notice. Please move to setting the HTTP
  Headers.


# ipfs dag

USAGE
  ipfs dag - Interact with IPLD DAG objects.

SYNOPSIS
  ipfs dag

DESCRIPTION

  'ipfs dag' is used for creating and manipulating DAG objects/hierarchies.
  
  This subcommand is intended to deprecate and replace
  the existing 'ipfs object' command moving forward.

SUBCOMMANDS
  ipfs dag export <root>        - Streams the selected DAG as a .car stream on
                                  stdout.
  ipfs dag get <ref>            - Get a DAG node from IPFS.
  ipfs dag import <path>...     - Import the contents of .car files
  ipfs dag put <object data>... - Add a DAG node to IPFS.
  ipfs dag resolve <ref>        - Resolve IPLD block.
  ipfs dag stat <root>...       - Gets stats for a DAG.

  For more information about each command, use:
  'ipfs dag <subcmd> --help'


# ipfs dag export

USAGE
  ipfs dag export <root> - Streams the selected DAG as a .car stream on stdout.

SYNOPSIS
  ipfs dag export [--progress | -p] [--] <root>

ARGUMENTS

  <root> - CID of a root to recursively export

OPTIONS

  -p, --progress  bool - Display progress on CLI. Defaults to true when STDERR
                         is a TTY.

DESCRIPTION

  'ipfs dag export' fetches a DAG and streams it out as a well-formed .car file.
  Note that at present only single root selections / .car files are supported.
  The output of blocks happens in strict DAG-traversal, first-seen, order.
  CAR file follows the CARv1 format: https://ipld.io/specs/transport/car/carv1/


# ipfs dag get

USAGE
  ipfs dag get <ref> - Get a DAG node from IPFS.

SYNOPSIS
  ipfs dag get [--output-codec=<output-codec>] [--] <ref>

ARGUMENTS

  <ref> - The object to get

OPTIONS

  --output-codec  string - Format that the object will be encoded as. Default:
                           dag-json.

DESCRIPTION

  'ipfs dag get' fetches a DAG node from IPFS and prints it out in the specified
  format.


# ipfs dag import

USAGE
  ipfs dag import <path>... - Import the contents of .car files

SYNOPSIS
  ipfs dag import [--pin-roots=false] [--silent] [--stats] [--allow-big-block]
                  [--] <path>...

ARGUMENTS

  <path>... - The path of a .car file.

OPTIONS

  --pin-roots        bool - Pin optional roots listed in the .car headers after
                            importing. Default: true.
  --silent           bool - No output.
  --stats            bool - Output stats.
  --allow-big-block  bool - Disable block size check and allow creation of
                            blocks bigger than 1MiB. WARNING: such blocks won't
                            be transferable over the standard bitswap. Default:
                            false.

DESCRIPTION

  'ipfs dag import' imports all blocks present in supplied .car
  ( Content Address aRchive ) files, recursively pinning any roots
  specified in the CAR file headers, unless --pin-roots is set to false.
  
  Note:
    This command will import all blocks in the CAR file, not just those
    reachable from the specified roots. However, these other blocks will
    not be pinned and may be garbage collected later.
  
    The pinning of the roots happens after all car files are processed,
    permitting import of DAGs spanning multiple files.
  
    Pinning takes place in offline-mode exclusively, one root at a time.
    If the combination of blocks from the imported CAR files and what is
    currently present in the blockstore does not represent a complete DAG,
    pinning of that individual root will fail.
  
  Maximum supported CAR version: 2
  Specification of CAR formats: https://ipld.io/specs/transport/car/


# ipfs dag put

USAGE
  ipfs dag put <object data>... - Add a DAG node to IPFS.

SYNOPSIS
  ipfs dag put [--store-codec=<store-codec>] [--input-codec=<input-codec>]
               [--pin] [--hash=<hash>] [--allow-big-block] [--] <object data>...

ARGUMENTS

  <object data>... - The object to put

OPTIONS

  --store-codec      string - Codec that the stored object will be encoded
                              with. Default: dag-cbor.
  --input-codec      string - Codec that the input object is encoded in.
                              Default: dag-json.
  --pin              bool   - Pin this object when adding.
  --hash             string - Hash function to use. Default: sha2-256.
  --allow-big-block  bool   - Disable block size check and allow creation of
                              blocks bigger than 1MiB. WARNING: such blocks
                              won't be transferable over the standard bitswap.
                              Default: false.

DESCRIPTION

  'ipfs dag put' accepts input from a file or stdin and parses it
  into an object of the specified format.


# ipfs dag resolve

USAGE
  ipfs dag resolve <ref> - Resolve IPLD block.

SYNOPSIS
  ipfs dag resolve [--] <ref>

ARGUMENTS

  <ref> - The path to resolve

DESCRIPTION

  'ipfs dag resolve' fetches a DAG node from IPFS, prints its address and remaining path.


# ipfs dag stat

USAGE
  ipfs dag stat <root>... - Gets stats for a DAG.

SYNOPSIS
  ipfs dag stat [--progress=false] [--] <root>...

ARGUMENTS

  <root>... - CID of a DAG root to get statistics for

OPTIONS

  -p, --progress  bool - Return progressive data while reading through the DAG.
                         Default: true.

DESCRIPTION

  'ipfs dag stat' fetches a DAG and returns various statistics about it.
  Statistics include size and number of blocks.
  
  Note: This command skips duplicate blocks in reporting both size and the number of blocks


# ipfs dht

USAGE
  ipfs dht - Issue commands directly through the DHT.

SYNOPSIS
  ipfs dht

SUBCOMMANDS
  ipfs dht query <peerID>... - Find the closest Peer IDs to a given Peer ID by
                               querying the DHT.

  For more information about each command, use:
  'ipfs dht <subcmd> --help'

DEPRECATED SUBCOMMANDS
  ipfs dht findpeer <peerID>...   - Find the multiaddresses associated with a
                                    Peer ID.
  ipfs dht findprovs <key>...     - Find peers that can provide a specific
                                    value, given a key.
  ipfs dht get <key>...           - Given a key, query the routing system for
                                    its best value.
  ipfs dht provide <key>...       - Announce to the network that you are
                                    providing given values.
  ipfs dht put <key> <value-file> - Write a key/value pair to the routing
                                    system.


# ipfs dht findpeer

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs dht findpeer <peerID>... - Find the multiaddresses associated with a
                                  Peer ID.

SYNOPSIS
  ipfs dht findpeer [--verbose | -v] [--] <peerID>...

ARGUMENTS

  <peerID>... - The ID of the peer to search for.

OPTIONS

  -v, --verbose  bool - Print extra information.

DESCRIPTION

  Outputs a list of newline-delimited multiaddresses.


# ipfs dht findprovs

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs dht findprovs <key>... - Find peers that can provide a specific value,
                                given a key.

SYNOPSIS
  ipfs dht findprovs [--verbose | -v] [--num-providers=<num-providers> | -n]
                     [--] <key>...

ARGUMENTS

  <key>... - The key to find providers for.

OPTIONS

  -v, --verbose        bool - Print extra information.
  -n, --num-providers  int  - The number of providers to find. Default: 20.

DESCRIPTION

  Outputs a list of newline-delimited provider Peer IDs.


# ipfs dht get

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs dht get <key>... - Given a key, query the routing system for its best
                          value.

SYNOPSIS
  ipfs dht get [--] <key>...

ARGUMENTS

  <key>... - The key to find a value for.

DESCRIPTION

  Outputs the best value for the given key.
  
  There may be several different values for a given key stored in the routing
  system; in this context 'best' means the record that is most desirable. There is
  no one metric for 'best': it depends entirely on the key type. For IPNS, 'best'
  is the record that is both valid and has the highest sequence number (freshest).
  Different key types can specify other 'best' rules.


# ipfs dht provide

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs dht provide <key>... - Announce to the network that you are providing
                              given values.

SYNOPSIS
  ipfs dht provide [--verbose | -v] [--recursive | -r] [--] <key>...

ARGUMENTS

  <key>... - The key[s] to send provide records for.

OPTIONS

  -v, --verbose    bool - Print extra information.
  -r, --recursive  bool - Recursively provide entire graph.


# ipfs dht put

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs dht put <key> <value-file> - Write a key/value pair to the routing
                                    system.

SYNOPSIS
  ipfs dht put [--allow-offline] [--] <key> <value-file>

ARGUMENTS

  <key>        - The key to store the value at.
  <value-file> - A path to a file containing the value to store.

OPTIONS

  --allow-offline  bool - When offline, save the IPNS record to the the local
                          datastore without broadcasting to the network instead
                          of simply failing.

DESCRIPTION

  Given a key of the form /foo/bar and a valid value for that key, this will write
  that value to the routing system with that key.
  
  Keys have two parts: a keytype (foo) and the key name (bar). IPNS uses the
  /ipns keytype, and expects the key name to be a Peer ID. IPNS entries are
  specifically formatted (protocol buffer).
  
  You may only use keytypes that are supported in your ipfs binary: currently
  this is only /ipns. Unless you have a relatively deep understanding of the
  go-ipfs routing internals, you likely want to be using 'ipfs name publish' instead
  of this.
  
  The value must be a valid value for the given key type. For example, if the key
  is /ipns/QmFoo, the value must be IPNS record (protobuf) signed with the key
  identified by QmFoo.


# ipfs dht query

USAGE
  ipfs dht query <peerID>... - Find the closest Peer IDs to a given Peer ID by
                               querying the DHT.

SYNOPSIS
  ipfs dht query [--verbose | -v] [--] <peerID>...

ARGUMENTS

  <peerID>... - The peerID to run the query against.

OPTIONS

  -v, --verbose  bool - Print extra information.

DESCRIPTION

  Outputs a list of newline-delimited Peer IDs.


# ipfs diag

USAGE
  ipfs diag - Generate diagnostic reports.

SYNOPSIS
  ipfs diag

SUBCOMMANDS
  ipfs diag cmds    - List commands run on this IPFS node.
  ipfs diag profile - Collect a performance profile for debugging.
  ipfs diag sys     - Print system diagnostic information.

  For more information about each command, use:
  'ipfs diag <subcmd> --help'


# ipfs diag cmds

USAGE
  ipfs diag cmds - List commands run on this IPFS node.

SYNOPSIS
  ipfs diag cmds [--verbose | -v]

OPTIONS

  -v, --verbose  bool - Print extra information.

DESCRIPTION

  Lists running and recently run commands.

SUBCOMMANDS
  ipfs diag cmds clear           - Clear inactive requests from the log.
  ipfs diag cmds set-time <time> - Set how long to keep inactive requests in
                                   the log.

  For more information about each command, use:
  'ipfs diag cmds <subcmd> --help'


# ipfs diag cmds clear

USAGE
  ipfs diag cmds clear - Clear inactive requests from the log.

SYNOPSIS
  ipfs diag cmds clear


# ipfs diag cmds set-time

USAGE
  ipfs diag cmds set-time <time> - Set how long to keep inactive requests in
                                   the log.

SYNOPSIS
  ipfs diag cmds set-time [--] <time>

ARGUMENTS

  <time> - Time to keep inactive requests in log.


# ipfs diag profile

USAGE
  ipfs diag profile - Collect a performance profile for debugging.

SYNOPSIS
  ipfs diag profile [--output=<output> | -o] [--collectors=<collectors>]...
                    [--profile-time=<profile-time>]
                    [--mutex-profile-fraction=<mutex-profile-fraction>]
                    [--block-profile-rate=<block-profile-rate>]

OPTIONS

  -o, --output              string - The path where the output .zip should be
                                     stored. Default:
                                     ./ipfs-profile-[timestamp].zip.
  --collectors              array  - The list of collectors to use for
                                     collecting diagnostic data. Default:
                                     [goroutines-stack goroutines-pprof version
                                     heap allocs bin cpu mutex block].
  --profile-time            string - The amount of time spent profiling. If
                                     this is set to 0, then sampling profiles
                                     are skipped. Default: 30s.
  --mutex-profile-fraction  int    - The fraction 1/n of mutex contention
                                     events that are reported in the mutex
                                     profile. Default: 4.
  --block-profile-rate      string - The duration to wait between sampling
                                     goroutine-blocking events for the blocking
                                     profile. Default: 1ms.

DESCRIPTION

  Collects profiles from a running go-ipfs daemon into a single zipfile.
  To aid in debugging, this command also attempts to include a copy of
  the running go-ipfs binary.
  
  Profiles can be examined using 'go tool pprof', some tips can be found at
  https://github.com/ipfs/kubo/blob/master/docs/debug-guide.md.
  
  Privacy Notice:
  
  The output file includes:
  
  - A list of running goroutines.
  - A CPU profile.
  - A heap inuse profile.
  - A heap allocation profile.
  - A mutex profile.
  - A block profile.
  - Your copy of go-ipfs.
  - The output of 'ipfs version --all'.
  
  It does not include:
  
  - Any of your IPFS data or metadata.
  - Your config or private key.
  - Your IP address.
  - The contents of your computer's memory, filesystem, etc.
  
  However, it could reveal:
  
  - Your build path, if you built go-ipfs yourself.
  - If and how a command/feature is being used (inferred from running functions).
  - Memory offsets of various data structures.
  - Any modifications you've made to go-ipfs.


# ipfs diag sys

USAGE
  ipfs diag sys - Print system diagnostic information.

SYNOPSIS
  ipfs diag sys

DESCRIPTION

  Prints out information about your computer to aid in easier debugging.


# ipfs dns

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs dns <domain-name> - Resolve DNSLink records.

SYNOPSIS
  ipfs dns [--recursive=false] [--] <domain-name>

ARGUMENTS

  <domain-name> - The domain-name name to resolve.

OPTIONS

  -r, --recursive  bool - Resolve until the result is not a DNS link. Default:
                          true.

DESCRIPTION

  This command can only recursively resolve DNSLink TXT records.
  It will fail to recursively resolve through IPNS keys etc.
  
  DEPRECATED: superseded by 'ipfs resolve'
  
  For general-purpose recursive resolution, use 'ipfs resolve -r'.
  It will work across multiple DNSLinks and IPNS keys.


# ipfs file

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs file - Interact with IPFS objects representing Unix filesystems.

SYNOPSIS
  ipfs file

DESCRIPTION

  Old interface to file systems represented by UnixFS.
  Superseded by modern alternatives: 'ipfs ls' and 'ipfs files'

DEPRECATED SUBCOMMANDS
  ipfs file ls <ipfs-path>... - List directory contents for Unix filesystem
                                objects. Deprecated: Use 'ipfs ls' and 'ipfs
                                files ls' instead.


# ipfs file ls

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs file ls <ipfs-path>... - List directory contents for Unix filesystem
                                objects. Deprecated: Use 'ipfs ls' and 'ipfs
                                files ls' instead.

SYNOPSIS
  ipfs file ls [--] <ipfs-path>...

ARGUMENTS

  <ipfs-path>... - The path to the IPFS object(s) to list links from.

DESCRIPTION

  Displays the contents of an IPFS or IPNS object(s) at the given path.
  
  The JSON output contains size information. For files, the child size
  is the total size of the file contents. For directories, the child
  size is the IPFS link size.
  
  The path can be a prefixless ref; in this case, we assume it to be an
  /ipfs ref and not /ipns.
  
  Example:
  
      > ipfs file ls QmW2WQi7j6c7UgJTarActp7tDNikE4B2qXtFCfLPdsgaTQ
      cat.jpg
      > ipfs file ls /ipfs/QmW2WQi7j6c7UgJTarActp7tDNikE4B2qXtFCfLPdsgaTQ
      cat.jpg
  
  This functionality is deprecated, and will be removed in future versions as it duplicates the functionality of 'ipfs ls'.
  If possible, please use 'ipfs ls' instead.


# ipfs files

USAGE
  ipfs files - Interact with unixfs files.

SYNOPSIS
  ipfs files [--flush=false]

OPTIONS

  -f, --flush  bool - Flush target and ancestors after write. Default: true.

DESCRIPTION

  Files is an API for manipulating IPFS objects as if they were a Unix
  filesystem.
  
  The files facility interacts with MFS (Mutable File System). MFS acts as a
  single, dynamic filesystem mount. MFS has a root CID that is transparently
  updated when a change happens (and can be checked with "ipfs files stat /").
  
  All files and folders within MFS are respected and will not be deleted
  during garbage collections. However, a DAG may be referenced in MFS without
  being fully available locally (MFS content is lazy loaded when accessed).
  MFS is independent from the list of pinned items ("ipfs pin ls"). Calls to
  "ipfs pin add" and "ipfs pin rm" will add and remove pins independently of
  MFS. If MFS content that was additionally pinned is removed by calling
  "ipfs files rm", it will still remain pinned.
  
  Content added with "ipfs add" (which by default also becomes pinned), is not
  added to MFS. Any content can be lazily referenced from MFS with the command
  "ipfs files cp /ipfs/<cid> /some/path/" (see ipfs files cp --help).
  
  
  NOTE:
  Most of the subcommands of 'ipfs files' accept the '--flush' flag. It defaults
  to true. Use caution when setting this flag to false. It will improve
  performance for large numbers of file operations, but it does so at the cost
  of consistency guarantees. If the daemon is unexpectedly killed before running
  'ipfs files flush' on the files in question, then data may be lost. This also
  applies to run 'ipfs repo gc' concurrently with '--flush=false'
  operations.

SUBCOMMANDS
  ipfs files chcid [<path>]      - Change the CID version or hash function of
                                   the root node of a given path.
  ipfs files cp <source> <dest>  - Add references to IPFS files and directories
                                   in MFS (or copy within MFS).
  ipfs files flush [<path>]      - Flush a given path's data to disk.
  ipfs files ls [<path>]         - List directories in the local mutable
                                   namespace.
  ipfs files mkdir <path>        - Make directories.
  ipfs files mv <source> <dest>  - Move files.
  ipfs files read <path>         - Read a file from MFS.
  ipfs files rm <path>...        - Remove a file from MFS.
  ipfs files stat <path>         - Display file status.
  ipfs files write <path> <data> - Append to (modify) a file in MFS.

  For more information about each command, use:
  'ipfs files <subcmd> --help'


# ipfs files chcid

USAGE
  ipfs files chcid [<path>] - Change the CID version or hash function of the
                              root node of a given path.

SYNOPSIS
  ipfs files chcid [--cid-version=<cid-version> | --cid-ver] [--hash=<hash>]
                   [--] [<path>]

ARGUMENTS

  [<path>] - Path to change. Default: '/'.

OPTIONS

  --cid-ver, --cid-version  int    - Cid version to use. (experimental).
  --hash                    string - Hash function to use. Will set Cid version
                                     to 1 if used. (experimental).

DESCRIPTION

  Change the CID version or hash function of the root node of a given path.


# ipfs files cp

USAGE
  ipfs files cp <source> <dest> - Add references to IPFS files and directories
                                  in MFS (or copy within MFS).

SYNOPSIS
  ipfs files cp [--parents | -p] [--] <source> <dest>

ARGUMENTS

  <source> - Source IPFS or MFS path to copy.
  <dest>   - Destination within MFS.

OPTIONS

  -p, --parents  bool - Make parent directories as needed.

DESCRIPTION

  "ipfs files cp" can be used to add references to any IPFS file or directory
  (usually in the form /ipfs/<CID>, but also any resolvable path) into MFS.
  This performs a lazy copy: the full DAG will not be fetched, only the root
  node being copied.
  
  It can also be used to copy files within MFS, but in the case when an
  IPFS-path matches an existing MFS path, the IPFS path wins.
  
  In order to add content to MFS from disk, you can use "ipfs add" to obtain the
  IPFS Content Identifier and then "ipfs files cp" to copy it into MFS:
  
  $ ipfs add --quieter --pin=false <your file>
  # ...
  # ... outputs the root CID at the end
  $ ipfs files cp /ipfs/<CID> /your/desired/mfs/path
  
  If you wish to fully copy content from a different IPFS peer into MFS, do not
  forget to force IPFS to fetch to full DAG after doing the "cp" operation. i.e:
  
  $ ipfs files cp /ipfs/<CID> /your/desired/mfs/path
  $ ipfs pin add <CID>
  
  The lazy-copy feature can also be used to protect partial DAG contents from
  garbage collection. i.e. adding the Wikipedia root to MFS would not download
  all the Wikipedia, but will prevent any downloaded Wikipedia-DAG content from
  being GC'ed.


# ipfs files flush

USAGE
  ipfs files flush [<path>] - Flush a given path's data to disk.

SYNOPSIS
  ipfs files flush [--] [<path>]

ARGUMENTS

  [<path>] - Path to flush. Default: '/'.

DESCRIPTION

  Flush a given path to the disk. This is only useful when other commands
  are run with the '--flush=false'.


# ipfs files ls

USAGE
  ipfs files ls [<path>] - List directories in the local mutable namespace.

SYNOPSIS
  ipfs files ls [--long | -l] [-U] [--] [<path>]

ARGUMENTS

  [<path>] - Path to show listing for. Defaults to '/'.

OPTIONS

  -l, --long  bool - Use long listing format.
  -U          bool - Do not sort; list entries in directory order.

DESCRIPTION

  List directories in the local mutable namespace (works on both IPFS and MFS paths).
  
  Examples:
  
      $ ipfs files ls /welcome/docs/
      about
      contact
      help
      quick-start
      readme
      security-notes
  
      $ ipfs files ls /myfiles/a/b/c/d
      foo
      bar


# ipfs files mkdir

USAGE
  ipfs files mkdir <path> - Make directories.

SYNOPSIS
  ipfs files mkdir [--parents | -p] [--cid-version=<cid-version> | --cid-ver]
                   [--hash=<hash>] [--] <path>

ARGUMENTS

  <path> - Path to dir to make.

OPTIONS

  -p, --parents             bool   - No error if existing, make parent
                                     directories as needed.
  --cid-ver, --cid-version  int    - Cid version to use. (experimental).
  --hash                    string - Hash function to use. Will set Cid version
                                     to 1 if used. (experimental).

DESCRIPTION

  Create the directory if it does not already exist.
  
  The directory will have the same CID version and hash function of the
  parent directory unless the --cid-version and --hash options are used.
  
  NOTE: All paths must be absolute.
  
  Examples:
  
      $ ipfs files mkdir /test/newdir
      $ ipfs files mkdir -p /test/does/not/exist/yet


# ipfs files mv

USAGE
  ipfs files mv <source> <dest> - Move files.

SYNOPSIS
  ipfs files mv [--] <source> <dest>

ARGUMENTS

  <source> - Source file to move.
  <dest>   - Destination path for file to be moved to.

DESCRIPTION

  Move files around. Just like the traditional Unix mv.
  
  Example:
  
      $ ipfs files mv /myfs/a/b/c /myfs/foo/newc


# ipfs files read

USAGE
  ipfs files read <path> - Read a file from MFS.

SYNOPSIS
  ipfs files read [--offset=<offset> | -o] [--count=<count> | -n] [--] <path>

ARGUMENTS

  <path> - Path to file to be read.

OPTIONS

  -o, --offset  int64 - Byte offset to begin reading from.
  -n, --count   int64 - Maximum number of bytes to read.

DESCRIPTION

  Read a specified number of bytes from a file at a given offset. By default,
  it will read the entire file similar to the Unix cat.
  
  Examples:
  
      $ ipfs files read /test/hello
      hello
  	


# ipfs files rm

USAGE
  ipfs files rm <path>... - Remove a file from MFS.

SYNOPSIS
  ipfs files rm [--recursive | -r] [--force] [--] <path>...

ARGUMENTS

  <path>... - File to remove.

OPTIONS

  -r, --recursive  bool - Recursively remove directories.
  --force          bool - Forcibly remove target at path; implies -r for
                          directories.

DESCRIPTION

  Remove files or directories.
  
      $ ipfs files rm /foo
      $ ipfs files ls /bar
      cat
      dog
      fish
      $ ipfs files rm -r /bar


# ipfs files stat

USAGE
  ipfs files stat <path> - Display file status.

SYNOPSIS
  ipfs files stat [--format=<format>] [--hash] [--size] [--with-local] [--]
                  <path>

ARGUMENTS

  <path> - Path to node to stat.

OPTIONS

  --format      string - Print statistics in given format. Allowed tokens:
                         <hash> <size> <cumulsize> <type> <childs>. Conflicts
                         with other format options. Default: <hash>
  Size:
                         <size>
  CumulativeSize: <cumulsize>
  ChildBlocks:
                         <childs>
  Type: <type>.
  --hash        bool   - Print only hash. Implies '--format=<hash>'. Conflicts
                         with other format options.
  --size        bool   - Print only size. Implies '--format=<cumulsize>'.
                         Conflicts with other format options.
  --with-local  bool   - Compute the amount of the dag that is local, and if
                         possible the total size.


# ipfs files write

USAGE
  ipfs files write <path> <data> - Append to (modify) a file in MFS.

SYNOPSIS
  ipfs files write [--offset=<offset> | -o] [--create | -e] [--parents | -p]
                   [--truncate | -t] [--count=<count> | -n] [--raw-leaves]
                   [--cid-version=<cid-version> | --cid-ver] [--hash=<hash>]
                   [--] <path> <data>

ARGUMENTS

  <path> - Path to write to.
  <data> - Data to write.

OPTIONS

  -o, --offset              int64  - Byte offset to begin writing at.
  -e, --create              bool   - Create the file if it does not exist.
  -p, --parents             bool   - Make parent directories as needed.
  -t, --truncate            bool   - Truncate the file to size zero before
                                     writing.
  -n, --count               int64  - Maximum number of bytes to read.
  --raw-leaves              bool   - Use raw blocks for newly created leaf
                                     nodes. (experimental).
  --cid-ver, --cid-version  int    - Cid version to use. (experimental).
  --hash                    string - Hash function to use. Will set Cid version
                                     to 1 if used. (experimental).

DESCRIPTION

  A low-level MFS command that allows you to append data at the end of a file, or
  specify a beginning offset within a file to write to. The entire length of the
  input will be written.
  
  If the '--create' option is specified, the file will be created if it does not
  exist. Nonexistent intermediate directories will not be created unless the
  '--parents' option is specified.
  
  Newly created files will have the same CID version and hash function of the
  parent directory unless the '--cid-version' and '--hash' options are used.
  
  Newly created leaves will be in the legacy format (Protobuf) if the
  CID version is 0, or raw if the CID version is non-zero.  Use of the
  '--raw-leaves' option will override this behavior.
  
  If the '--flush' option is set to false, changes will not be propagated to the
  merkledag root. This can make operations much faster when doing a large number
  of writes to a deeper directory structure.
  
  EXAMPLE:
  
      echo "hello world" | ipfs files write --create --parents /myfs/a/b/file
      echo "hello world" | ipfs files write --truncate /myfs/a/b/file
  
  WARNING:
  
  Usage of the '--flush=false' option does not guarantee data durability until
  the tree has been flushed. This can be accomplished by running 'ipfs files
  stat' on the file or any of its ancestors.
  
  WARNING:
  
  The CID produced by 'files write' will be different from 'ipfs add' because
  'ipfs file write' creates a trickle-dag optimized for append-only operations
  See '--trickle' in 'ipfs add --help' for more information.
  
  If you want to add a file without modifying an existing one,
  use 'ipfs add' with '--to-files':
  
    > ipfs files mkdir -p /myfs/dir
    > ipfs add example.jpg --to-files /myfs/dir/
    > ipfs files ls /myfs/dir/
    example.jpg
  
  See '--to-files' in 'ipfs add --help' for more information.


# ipfs filestore

USAGE
  ipfs filestore - Interact with filestore objects.

SYNOPSIS
  ipfs filestore

SUBCOMMANDS
  ipfs filestore dups              - List blocks that are both in the filestore
                                     and standard block storage.
  ipfs filestore ls [<obj>]...     - List objects in filestore.
  ipfs filestore verify [<obj>]... - Verify objects in filestore.

  For more information about each command, use:
  'ipfs filestore <subcmd> --help'


# ipfs filestore dups

USAGE
  ipfs filestore dups - List blocks that are both in the filestore and standard
                        block storage.

SYNOPSIS
  ipfs filestore dups


# ipfs filestore ls

USAGE
  ipfs filestore ls [<obj>]... - List objects in filestore.

SYNOPSIS
  ipfs filestore ls [--file-order] [--] [<obj>...]

ARGUMENTS

  [<obj>]... - Cid of objects to list.

OPTIONS

  --file-order  bool - sort the results based on the path of the backing file.

DESCRIPTION

  List objects in the filestore.
  
  If one or more <obj> is specified only list those specific objects,
  otherwise list all objects.
  
  The output is:
  
  <hash> <size> <path> <offset>


# ipfs filestore verify

USAGE
  ipfs filestore verify [<obj>]... - Verify objects in filestore.

SYNOPSIS
  ipfs filestore verify [--file-order] [--] [<obj>...]

ARGUMENTS

  [<obj>]... - Cid of objects to verify.

OPTIONS

  --file-order  bool - verify the objects based on the order of the backing
                       file.

DESCRIPTION

  Verify objects in the filestore.
  
  If one or more <obj> is specified only verify those specific objects,
  otherwise verify all objects.
  
  The output is:
  
  <status> <hash> <size> <path> <offset>
  
  Where <status> is one of:
  ok:       the block can be reconstructed
  changed:  the contents of the backing file have changed
  no-file:  the backing file could not be found
  error:    there was some other problem reading the file
  missing:  <obj> could not be found in the filestore
  ERROR:    internal error, most likely due to a corrupt database
  
  For ERROR entries the error will also be printed to stderr.


# ipfs get

USAGE
  ipfs get <ipfs-path> - Download IPFS objects.

SYNOPSIS
  ipfs get [--output=<output> | -o] [--archive | -a] [--compress | -C]
           [--compression-level=<compression-level> | -l] [--progress=false]
           [--] <ipfs-path>

ARGUMENTS

  <ipfs-path> - The path to the IPFS object(s) to be outputted.

OPTIONS

  -o, --output             string - The path where the output should be stored.
  -a, --archive            bool   - Output a TAR archive.
  -C, --compress           bool   - Compress the output with GZIP compression.
  -l, --compression-level  int    - The level of compression (1-9).
  -p, --progress           bool   - Stream progress data. Default: true.

DESCRIPTION

  Stores to disk the data contained an IPFS or IPNS object(s) at the given path.
  
  By default, the output will be stored at './<ipfs-path>', but an alternate
  path can be specified with '--output=<path>' or '-o=<path>'.
  
  To output a TAR archive instead of unpacked files, use '--archive' or '-a'.
  
  To compress the output with GZIP compression, use '--compress' or '-C'. You
  may also specify the level of compression by specifying '-l=<1-9>'.


# ipfs id

USAGE
  ipfs id [<peerid>] - Show IPFS node id info.

SYNOPSIS
  ipfs id [--format=<format> | -f] [--peerid-base=<peerid-base>] [--] [<peerid>]

ARGUMENTS

  [<peerid>] - Peer.ID of node to look up.

OPTIONS

  -f, --format   string - Optional output format.
  --peerid-base  string - Encoding used for peer IDs: Can either be a multibase
                          encoded CID or a base58btc encoded multihash. Takes
                          {b58mh|base36|k|base32|b...}. Default: b58mh.

DESCRIPTION

  Prints out information about the specified peer.
  If no peer is specified, prints out information for local peers.
  
  'ipfs id' supports the format option for output with the following keys:
  <id> : The peers id.
  <aver>: Agent version.
  <pver>: Protocol version.
  <pubkey>: Public key.
  <addrs>: Addresses (newline delimited).
  <protocols>: Libp2p Protocol registrations (newline delimited).
  
  EXAMPLE:
  
      ipfs id Qmece2RkXhsKe5CRooNisBTh4SK119KrXXGmoK6V3kb8aH -f="<addrs>\n"


# ipfs init

USAGE
  ipfs init [<default-config>] - Initializes ipfs config file.

SYNOPSIS
  ipfs init [--algorithm=<algorithm> | -a] [--bits=<bits> | -b]
            [--empty-repo=false] [--profile=<profile> | -p] [--]
            [<default-config>]

ARGUMENTS

  [<default-config>] - Initialize with the given configuration.

OPTIONS

  -a, --algorithm   string - Cryptographic algorithm to use for key generation.
                             Default: ed25519.
  -b, --bits        int    - Number of bits to use in the generated RSA private
                             key.
  -e, --empty-repo  bool   - Don't add and pin help files to the local storage.
                             Default: true.
  -p, --profile     string - Apply profile settings to config. Multiple
                             profiles can be separated by ','.

DESCRIPTION

  Initializes ipfs configuration files and generates a new keypair.
  
  If you are going to run IPFS in server environment, you may want to
  initialize it using 'server' profile.
  
  For the list of available profiles see 'ipfs config profile --help'
  
  ipfs uses a repository in the local file system. By default, the repo is
  located at ~/.ipfs. To change the repo location, set the $IPFS_PATH
  environment variable:
  
      export IPFS_PATH=/path/to/ipfsrepo


# ipfs key

USAGE
  ipfs key - Create and list IPNS name keypairs

SYNOPSIS
  ipfs key

DESCRIPTION

  'ipfs key gen' generates a new keypair for usage with IPNS and 'ipfs name
  publish'.
  
    > ipfs key gen --type=rsa --size=2048 mykey
    > ipfs name publish --key=mykey QmSomeHash
  
  'ipfs key list' lists the available keys.
  
    > ipfs key list
    self
    mykey
  		

SUBCOMMANDS
  ipfs key export <name>           - Export a keypair
  ipfs key gen <name>              - Create a new keypair
  ipfs key import <name> <key>     - Import a key and prints imported key id
  ipfs key list                    - List all local keypairs.
  ipfs key rename <name> <newName> - Rename a keypair.
  ipfs key rm <name>...            - Remove a keypair.
  ipfs key rotate                  - Rotates the IPFS identity.

  For more information about each command, use:
  'ipfs key <subcmd> --help'


# ipfs key export

USAGE
  ipfs key export <name> - Export a keypair

SYNOPSIS
  ipfs key export [--output=<output> | -o] [--format=<format> | -f] [--] <name>

ARGUMENTS

  <name> - name of key to export

OPTIONS

  -o, --output  string - The path where the output should be stored.
  -f, --format  string - The format of the exported private key,
                         libp2p-protobuf-cleartext or pem-pkcs8-cleartext.
                         Default: libp2p-protobuf-cleartext.

DESCRIPTION

  Exports a named libp2p key to disk.
  
  By default, the output will be stored at './<key-name>.key', but an alternate
  path can be specified with '--output=<path>' or '-o=<path>'.
  
  It is possible to export a private key to interoperable PEM PKCS8 format by explicitly
  passing '--format=pem-pkcs8-cleartext'. The resulting PEM file can then be consumed
  elsewhere. For example, using openssl to get a PEM with public key:
  
    $ ipfs key export testkey --format=pem-pkcs8-cleartext -o privkey.pem
    $ openssl pkey -in privkey.pem -pubout > pubkey.pem


# ipfs key gen

USAGE
  ipfs key gen <name> - Create a new keypair

SYNOPSIS
  ipfs key gen [--type=<type> | -t] [--size=<size> | -s]
               [--ipns-base=<ipns-base>] [--] <name>

ARGUMENTS

  <name> - name of key to create

OPTIONS

  -t, --type   string - type of the key to create: rsa, ed25519. Default:
                        ed25519.
  -s, --size   int    - size of the key to generate.
  --ipns-base  string - Encoding used for keys: Can either be a multibase
                        encoded CID or a base58btc encoded multihash. Takes
                        {b58mh|base36|k|base32|b...}. Default: base36.


# ipfs key import

USAGE
  ipfs key import <name> <key> - Import a key and prints imported key id

SYNOPSIS
  ipfs key import [--ipns-base=<ipns-base>] [--format=<format> | -f]
                  [--allow-any-key-type] [--] <name> <key>

ARGUMENTS

  <name> - name to associate with key in keychain
  <key>  - key provided by generate or export

OPTIONS

  --ipns-base           string - Encoding used for keys: Can either be a
                                 multibase encoded CID or a base58btc encoded
                                 multihash. Takes {b58mh|base36|k|base32|b...}.
                                 Default: base36.
  -f, --format          string - The format of the private key to import,
                                 libp2p-protobuf-cleartext or
                                 pem-pkcs8-cleartext. Default:
                                 libp2p-protobuf-cleartext.
  --allow-any-key-type  bool   - Allow importing any key type. Default: false.

DESCRIPTION

  Imports a key and stores it under the provided name.
  
  By default, the key is assumed to be in 'libp2p-protobuf-cleartext' format,
  however it is possible to import private keys wrapped in interoperable PEM PKCS8
  by passing '--format=pem-pkcs8-cleartext'.
  
  The PEM format allows for key generation outside of the IPFS node:
  
    $ openssl genpkey -algorithm ED25519 > ed25519.pem
    $ ipfs key import test-openssl -f pem-pkcs8-cleartext ed25519.pem


# ipfs key list

USAGE
  ipfs key list - List all local keypairs.

SYNOPSIS
  ipfs key list [-l] [--ipns-base=<ipns-base>]

OPTIONS

  -l           bool   - Show extra information about keys.
  --ipns-base  string - Encoding used for keys: Can either be a multibase
                        encoded CID or a base58btc encoded multihash. Takes
                        {b58mh|base36|k|base32|b...}. Default: base36.


# ipfs key rename

USAGE
  ipfs key rename <name> <newName> - Rename a keypair.

SYNOPSIS
  ipfs key rename [--force | -f] [--ipns-base=<ipns-base>] [--] <name> <newName>

ARGUMENTS

  <name>    - name of key to rename
  <newName> - new name of the key

OPTIONS

  -f, --force  bool   - Allow to overwrite an existing key.
  --ipns-base  string - Encoding used for keys: Can either be a multibase
                        encoded CID or a base58btc encoded multihash. Takes
                        {b58mh|base36|k|base32|b...}. Default: base36.


# ipfs key rm

USAGE
  ipfs key rm <name>... - Remove a keypair.

SYNOPSIS
  ipfs key rm [-l] [--ipns-base=<ipns-base>] [--] <name>...

ARGUMENTS

  <name>... - names of keys to remove

OPTIONS

  -l           bool   - Show extra information about keys.
  --ipns-base  string - Encoding used for keys: Can either be a multibase
                        encoded CID or a base58btc encoded multihash. Takes
                        {b58mh|base36|k|base32|b...}. Default: base36.


# ipfs key rotate

USAGE
  ipfs key rotate - Rotates the IPFS identity.

SYNOPSIS
  ipfs key rotate [--oldkey=<oldkey> | -o] [--type=<type> | -t]
                  [--size=<size> | -s]

OPTIONS

  -o, --oldkey  string - Keystore name to use for backing up your existing
                         identity.
  -t, --type    string - type of the key to create: rsa, ed25519. Default:
                         ed25519.
  -s, --size    int    - size of the key to generate.

DESCRIPTION

  Generates a new ipfs identity and saves it to the ipfs config file.
  Your existing identity key will be backed up in the Keystore.
  The daemon must not be running when calling this command.
  
  ipfs uses a repository in the local file system. By default, the repo is
  located at ~/.ipfs. To change the repo location, set the $IPFS_PATH
  environment variable:
  
      export IPFS_PATH=/path/to/ipfsrepo


# ipfs log

USAGE
  ipfs log - Interact with the daemon log output.

SYNOPSIS
  ipfs log

DESCRIPTION

  'ipfs log' contains utility commands to affect or read the logging
  output of a running daemon.
  
  There are also two environmental variables that direct the logging 
  system (not just for the daemon logs, but all commands):
      IPFS_LOGGING - sets the level of verbosity of the logging.
          One of: debug, info, warn, error, dpanic, panic, fatal
      IPFS_LOGGING_FMT - sets formatting of the log output.
          One of: color, nocolor

SUBCOMMANDS
  ipfs log level <subsystem> <level> - Change the logging level.
  ipfs log ls                        - List the logging subsystems.

  For more information about each command, use:
  'ipfs log <subcmd> --help'

EXPERIMENTAL SUBCOMMANDS
  ipfs log tail - Read the event log.


# ipfs log level

USAGE
  ipfs log level <subsystem> <level> - Change the logging level.

SYNOPSIS
  ipfs log level [--] <subsystem> <level>

ARGUMENTS

  <subsystem> - The subsystem logging identifier. Use 'all' for all subsystems.
  <level>     - The log level, with 'debug' the most verbose and 'fatal' the
                least verbose.
  			One of: debug, info, warn, error, dpanic,
                panic, fatal.

DESCRIPTION

  Change the verbosity of one or all subsystems log output. This does not affect
  the event log.


# ipfs log ls

USAGE
  ipfs log ls - List the logging subsystems.

SYNOPSIS
  ipfs log ls

DESCRIPTION

  'ipfs log ls' is a utility command used to list the logging
  subsystems of a running daemon.


# ipfs log tail

WARNING:   EXPERIMENTAL, command may change in future releases

USAGE
  ipfs log tail - Read the event log.

SYNOPSIS
  ipfs log tail

DESCRIPTION

  Outputs event log messages (not other log messages) as they are generated.
  
  Currently broken. Follow https://github.com/ipfs/kubo/issues/9245 for updates.


# ipfs ls

USAGE
  ipfs ls <ipfs-path>... - List directory contents for Unix filesystem objects.

SYNOPSIS
  ipfs ls [--headers | -v] [--resolve-type=false] [--size=false] [--stream | -s]
          [--] <ipfs-path>...

ARGUMENTS

  <ipfs-path>... - The path to the IPFS object(s) to list links from.

OPTIONS

  -v, --headers   bool - Print table headers (Hash, Size, Name).
  --resolve-type  bool - Resolve linked objects to find out their types.
                         Default: true.
  --size          bool - Resolve linked objects to find out their file size.
                         Default: true.
  -s, --stream    bool - Enable experimental streaming of directory entries as
                         they are traversed.

DESCRIPTION

  Displays the contents of an IPFS or IPNS object(s) at the given path, with
  the following format:
  
    <link base58 hash> <link size in bytes> <link name>
  
  The JSON output contains type information.


# ipfs mount

WARNING:   EXPERIMENTAL, command may change in future releases

USAGE
  ipfs mount - Mounts IPFS to the filesystem (read-only).

SYNOPSIS
  ipfs mount [--ipfs-path=<ipfs-path> | -f] [--ipns-path=<ipns-path> | -n]

OPTIONS

  -f, --ipfs-path  string - The path where IPFS should be mounted.
  -n, --ipns-path  string - The path where IPNS should be mounted.

DESCRIPTION

  Mount IPFS at a read-only mountpoint on the OS. The default, /ipfs and /ipns,
  are set in the configuration file, but can be overridden by the options.
  All IPFS objects will be accessible under this directory. Note that the
  root will not be listable, as it is virtual. Access known paths directly.
  
  You may have to create /ipfs and /ipns before using 'ipfs mount':
  
  > sudo mkdir /ipfs /ipns
  > sudo chown $(whoami) /ipfs /ipns
  > ipfs daemon &
  > ipfs mount
  
  Example:
  
  # setup
  > mkdir foo
  > echo "baz" > foo/bar
  > ipfs add -r foo
  added QmWLdkp93sNxGRjnFHPaYg8tCQ35NBY3XPn6KiETd3Z4WR foo/bar
  added QmSh5e7S6fdcu75LAbXNZAFY2nGyZUJXyLCJDvn2zRkWyC foo
  > ipfs ls QmSh5e7S6fdcu75LAbXNZAFY2nGyZUJXyLCJDvn2zRkWyC
  QmWLdkp93sNxGRjnFHPaYg8tCQ35NBY3XPn6KiETd3Z4WR 12 bar
  > ipfs cat QmWLdkp93sNxGRjnFHPaYg8tCQ35NBY3XPn6KiETd3Z4WR
  baz
  
  # mount
  > ipfs daemon &
  > ipfs mount
  IPFS mounted at: /ipfs
  IPNS mounted at: /ipns
  > cd /ipfs/QmSh5e7S6fdcu75LAbXNZAFY2nGyZUJXyLCJDvn2zRkWyC
  > ls
  bar
  > cat bar
  baz
  > cat /ipfs/QmSh5e7S6fdcu75LAbXNZAFY2nGyZUJXyLCJDvn2zRkWyC/bar
  baz
  > cat /ipfs/QmWLdkp93sNxGRjnFHPaYg8tCQ35NBY3XPn6KiETd3Z4WR
  baz


# ipfs multibase

USAGE
  ipfs multibase - Encode and decode files or stdin with multibase format

SYNOPSIS
  ipfs multibase

SUBCOMMANDS
  ipfs multibase decode <encoded_file>    - Decode multibase string
  ipfs multibase encode <file>            - Encode data into multibase string
  ipfs multibase list                     - List available multibase encodings.
  ipfs multibase transcode <encoded_file> - Transcode multibase string between
                                            bases

  For more information about each command, use:
  'ipfs multibase <subcmd> --help'


# ipfs multibase decode

USAGE
  ipfs multibase decode <encoded_file> - Decode multibase string

SYNOPSIS
  ipfs multibase decode [--] <encoded_file>

ARGUMENTS

  <encoded_file> - encoded data to decode

DESCRIPTION

  This command expects multibase inside of a file or via stdin:
  
    > echo -n hello | ipfs multibase encode -b base16 > file
    > cat file
    f68656c6c6f
  
    > ipfs multibase decode file
    hello
  
    > cat file | ipfs multibase decode
    hello


# ipfs multibase encode

USAGE
  ipfs multibase encode <file> - Encode data into multibase string

SYNOPSIS
  ipfs multibase encode [-b=<b>] [--] <file>

ARGUMENTS

  <file> - data to encode

OPTIONS

  -b  string - multibase encoding. Default: base64url.

DESCRIPTION

  This command expects a file name or data provided via stdin.
  
  By default it will use URL-safe base64url encoding,
  but one can customize used base with -b:
  
    > echo hello | ipfs multibase encode -b base16 > output_file
    > cat output_file
    f68656c6c6f0a
  
    > echo hello > input_file
    > ipfs multibase encode -b base16 input_file
    f68656c6c6f0a
    


# ipfs multibase list

USAGE
  ipfs multibase list - List available multibase encodings.

SYNOPSIS
  ipfs multibase list [--prefix] [--numeric]

OPTIONS

  --prefix   bool - also include the single letter prefixes in addition to the
                    code.
  --numeric  bool - also include numeric codes.

DESCRIPTION

  'ipfs cid bases' relies on https://github.com/multiformats/go-multibase


# ipfs multibase transcode

USAGE
  ipfs multibase transcode <encoded_file> - Transcode multibase string between
                                            bases

SYNOPSIS
  ipfs multibase transcode [-b=<b>] [--] <encoded_file>

ARGUMENTS

  <encoded_file> - encoded data to decode

OPTIONS

  -b  string - multibase encoding. Default: base64url.

DESCRIPTION

  This command expects multibase inside of a file or via stdin.
  
  By default it will use URL-safe base64url encoding,
  but one can customize used base with -b:
  
    > echo -n hello | ipfs multibase encode > file
    > cat file
    uaGVsbG8
  
    > ipfs multibase transcode file -b base16 > transcoded_file
    > cat transcoded_file
    f68656c6c6f


# ipfs name

USAGE
  ipfs name - Publish and resolve IPNS names.

SYNOPSIS
  ipfs name

DESCRIPTION

  IPNS is a PKI namespace, where names are the hashes of public keys, and
  the private key enables publishing new (signed) values. In both publish
  and resolve, the default name used is the node's own PeerID,
  which is the hash of its public key.
  
  You can use the 'ipfs key' commands to list and generate more names and their
  respective keys.
  
  Examples:
  
  Publish an <ipfs-path> with your default name:
  
    > ipfs name publish /ipfs/QmatmE9msSfkKxoffpHwNLNKgwZG8eT9Bud6YoPab52vpy
    Published to QmbCMUZw6JFeZ7Wp9jkzbye3Fzp2GGcPgC3nmeUjfVF87n: /ipfs/QmatmE9msSfkKxoffpHwNLNKgwZG8eT9Bud6YoPab52vpy
  
  Publish an <ipfs-path> with another name, added by an 'ipfs key' command:
  
    > ipfs key gen --type=rsa --size=2048 mykey
    > ipfs name publish --key=mykey /ipfs/QmatmE9msSfkKxoffpHwNLNKgwZG8eT9Bud6YoPab52vpy
    Published to QmSrPmbaUKA3ZodhzPWZnpFgcPMFWF4QsxXbkWfEptTBJd: /ipfs/QmatmE9msSfkKxoffpHwNLNKgwZG8eT9Bud6YoPab52vpy
  
  Resolve the value of your name:
  
    > ipfs name resolve
    /ipfs/QmatmE9msSfkKxoffpHwNLNKgwZG8eT9Bud6YoPab52vpy
  
  Resolve the value of another name:
  
    > ipfs name resolve QmaCpDMGvV2BGHeYERUEnRQAwe3N8SzbUtfsmvsqQLuvuJ
    /ipfs/QmSiTko9JZyabH56y2fussEt1A5oDqsFXB3CkvAqraFryz
  
  Resolve the value of a dnslink:
  
    > ipfs name resolve ipfs.io
    /ipfs/QmaBvfZooxWkrv7D3r8LS9moNjzD2o525XMZze69hhoxf5

SUBCOMMANDS
  ipfs name publish <ipfs-path> - Publish IPNS names.
  ipfs name resolve [<name>]    - Resolve IPNS names.

  For more information about each command, use:
  'ipfs name <subcmd> --help'

EXPERIMENTAL SUBCOMMANDS
  ipfs name inspect <record> - Inspects an IPNS Record
  ipfs name pubsub           - IPNS pubsub management


# ipfs name inspect

WARNING:   EXPERIMENTAL, command may change in future releases

USAGE
  ipfs name inspect <record> - Inspects an IPNS Record

SYNOPSIS
  ipfs name inspect [--verify=<verify>] [--dump=false] [--] <record>

ARGUMENTS

  <record> - The IPNS record payload to be verified.

OPTIONS

  --verify  string - CID of the public IPNS key to validate against.
  --dump    bool   - Include a full hex dump of the raw Protobuf record.
                     Default: true.

DESCRIPTION

  Prints values inside of IPNS Record protobuf and its DAG-CBOR Data field.
  
  The input can be a file or STDIN, the output can be JSON:
  
    $ ipfs routing get "/ipns/$PEERID" > ipns_record
    $ ipfs name inspect --enc=json < ipns_record
  
  Values in PublicKey, SignatureV1 and SignatureV2 fields are raw bytes encoded
  in Multibase. The Data field is DAG-CBOR represented as DAG-JSON.
  
  Passing --verify will verify signature against provided public key.


# ipfs name publish

USAGE
  ipfs name publish <ipfs-path> - Publish IPNS names.

SYNOPSIS
  ipfs name publish [--resolve=false] [--lifetime=<lifetime> | -t]
                    [--allow-offline] [--ttl=<ttl>] [--key=<key> | -k]
                    [--quieter | -Q] [--v1compat=false]
                    [--ipns-base=<ipns-base>] [--] <ipfs-path>

ARGUMENTS

  <ipfs-path> - ipfs path of the object to be published.

OPTIONS

  --resolve        bool   - Check if the given path can be resolved before
                            publishing. Default: true.
  -t, --lifetime   string - Time duration that the record will be valid for.
                            Default: 24h.
      This accepts durations such as
                            "300s", "1.5h" or "2h45m". Valid time units are
     
                            "ns", "us" (or "µs"), "ms", "s", "m", "h".
  --allow-offline  bool   - When offline, save the IPNS record to the the local
                            datastore without broadcasting to the network
                            instead of simply failing.
  --ttl            string - Time duration this record should be cached for.
                            Uses the same syntax as the lifetime option.
                            (caution: experimental).
  -k, --key        string - Name of the key to be used or a valid PeerID, as
                            listed by 'ipfs key list -l'. Default: self.
  -Q, --quieter    bool   - Write only final hash.
  --v1compat       bool   - Produce a backward-compatible IPNS Record by
                            including fields for both V1 and V2 signatures.
                            Default: true.
  --ipns-base      string - Encoding used for keys: Can either be a multibase
                            encoded CID or a base58btc encoded multihash. Takes
                            {b58mh|base36|k|base32|b...}. Default: base36.

DESCRIPTION

  IPNS is a PKI namespace, where names are the hashes of public keys, and
  the private key enables publishing new (signed) values. In both publish
  and resolve, the default name used is the node's own PeerID,
  which is the hash of its public key.
  
  You can use the 'ipfs key' commands to list and generate more names and their
  respective keys.
  
  Examples:
  
  Publish an <ipfs-path> with your default name:
  
    > ipfs name publish /ipfs/QmatmE9msSfkKxoffpHwNLNKgwZG8eT9Bud6YoPab52vpy
    Published to QmbCMUZw6JFeZ7Wp9jkzbye3Fzp2GGcPgC3nmeUjfVF87n: /ipfs/QmatmE9msSfkKxoffpHwNLNKgwZG8eT9Bud6YoPab52vpy
  
  Publish an <ipfs-path> with another name, added by an 'ipfs key' command:
  
    > ipfs key gen --type=rsa --size=2048 mykey
    > ipfs name publish --key=mykey /ipfs/QmatmE9msSfkKxoffpHwNLNKgwZG8eT9Bud6YoPab52vpy
    Published to QmSrPmbaUKA3ZodhzPWZnpFgcPMFWF4QsxXbkWfEptTBJd: /ipfs/QmatmE9msSfkKxoffpHwNLNKgwZG8eT9Bud6YoPab52vpy
  
  Alternatively, publish an <ipfs-path> using a valid PeerID (as listed by 
  'ipfs key list -l'):
  
   > ipfs name publish --key=QmbCMUZw6JFeZ7Wp9jkzbye3Fzp2GGcPgC3nmeUjfVF87n /ipfs/QmatmE9msSfkKxoffpHwNLNKgwZG8eT9Bud6YoPab52vpy
    Published to QmbCMUZw6JFeZ7Wp9jkzbye3Fzp2GGcPgC3nmeUjfVF87n: /ipfs/QmatmE9msSfkKxoffpHwNLNKgwZG8eT9Bud6YoPab52vpy


# ipfs name pubsub

WARNING:   EXPERIMENTAL, command may change in future releases

USAGE
  ipfs name pubsub - IPNS pubsub management

SYNOPSIS
  ipfs name pubsub

DESCRIPTION

  Manage and inspect the state of the IPNS pubsub resolver.
  
  Note: this command is experimental and subject to change as the system is refined

EXPERIMENTAL SUBCOMMANDS
  ipfs name pubsub cancel <name> - Cancel a name subscription.
  ipfs name pubsub state         - Query the state of IPNS pubsub.
  ipfs name pubsub subs          - Show current name subscriptions.


# ipfs name pubsub cancel

WARNING:   EXPERIMENTAL, command may change in future releases

USAGE
  ipfs name pubsub cancel <name> - Cancel a name subscription.

SYNOPSIS
  ipfs name pubsub cancel [--] <name>

ARGUMENTS

  <name> - Name to cancel the subscription for.


# ipfs name pubsub state

WARNING:   EXPERIMENTAL, command may change in future releases

USAGE
  ipfs name pubsub state - Query the state of IPNS pubsub.

SYNOPSIS
  ipfs name pubsub state


# ipfs name pubsub subs

WARNING:   EXPERIMENTAL, command may change in future releases

USAGE
  ipfs name pubsub subs - Show current name subscriptions.

SYNOPSIS
  ipfs name pubsub subs [--ipns-base=<ipns-base>]

OPTIONS

  --ipns-base  string - Encoding used for keys: Can either be a multibase
                        encoded CID or a base58btc encoded multihash. Takes
                        {b58mh|base36|k|base32|b...}. Default: base36.


# ipfs name resolve

USAGE
  ipfs name resolve [<name>] - Resolve IPNS names.

SYNOPSIS
  ipfs name resolve [--recursive=false] [--nocache | -n]
                    [--dht-record-count=<dht-record-count> | --dhtrc]
                    [--dht-timeout=<dht-timeout> | --dhtt] [--stream | -s] [--]
                    [<name>]

ARGUMENTS

  [<name>] - The IPNS name to resolve. Defaults to your node's peerID.

OPTIONS

  -r, --recursive              bool   - Resolve until the result is not an IPNS
                                        name. Default: true.
  -n, --nocache                bool   - Do not use cached entries.
  --dhtrc, --dht-record-count  uint   - Number of records to request for DHT
                                        resolution.
  --dhtt, --dht-timeout        string - Max time to collect values during DHT
                                        resolution eg "30s". Pass 0 for no
                                        timeout.
  -s, --stream                 bool   - Stream entries as they are found.

DESCRIPTION

  IPNS is a PKI namespace, where names are the hashes of public keys, and
  the private key enables publishing new (signed) values. In both publish
  and resolve, the default name used is the node's own PeerID,
  which is the hash of its public key.
  
  You can use the 'ipfs key' commands to list and generate more names and their
  respective keys.
  
  Examples:
  
  Resolve the value of your name:
  
    > ipfs name resolve
    /ipfs/QmatmE9msSfkKxoffpHwNLNKgwZG8eT9Bud6YoPab52vpy
  
  Resolve the value of another name:
  
    > ipfs name resolve QmaCpDMGvV2BGHeYERUEnRQAwe3N8SzbUtfsmvsqQLuvuJ
    /ipfs/QmSiTko9JZyabH56y2fussEt1A5oDqsFXB3CkvAqraFryz
  
  Resolve the value of a dnslink:
  
    > ipfs name resolve ipfs.io
    /ipfs/QmaBvfZooxWkrv7D3r8LS9moNjzD2o525XMZze69hhoxf5


# ipfs object

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs object - Deprecated commands to interact with dag-pb objects. Use 'dag'
                or 'files' instead.

SYNOPSIS
  ipfs object

DESCRIPTION

  'ipfs object' is a legacy plumbing command used to manipulate dag-pb objects
  directly. Deprecated, use more modern 'ipfs dag' and 'ipfs files' instead.

DEPRECATED SUBCOMMANDS
  ipfs object data <key>           - Deprecated way to read the raw bytes of a
                                     dag-pb object: use 'dag get' instead.
  ipfs object diff <obj_a> <obj_b> - Display the diff between two IPFS objects.
  ipfs object get <key>            - Deprecated way to get and serialize the
                                     dag-pb node. Use 'dag get' instead
  ipfs object links <key>          - Deprecated way to output links in the
                                     specified dag-pb object: use 'dag get'
                                     instead.
  ipfs object new [<template>]     - Deprecated way to create a new dag-pb
                                     object from a template.
  ipfs object patch                - Deprecated way to create a new merkledag
                                     object based on an existing one. Use MFS
                                     with 'files cp|rm' instead.
  ipfs object put <data>           - Deprecated way to store input as a DAG
                                     object. Use 'dag put' instead.
  ipfs object stat <key>           - Deprecated way to read stats for the
                                     dag-pb node. Use 'files stat' instead.


# ipfs object data

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs object data <key> - Deprecated way to read the raw bytes of a dag-pb
                           object: use 'dag get' instead.

SYNOPSIS
  ipfs object data [--] <key>

ARGUMENTS

  <key> - Key of the object to retrieve, in base58-encoded multihash format.

DESCRIPTION

  'ipfs object data' is a deprecated plumbing command for retrieving the raw
  bytes stored in a dag-pb node. It outputs to stdout, and <key> is a base58
  encoded multihash. Provided for legacy reasons. Use 'ipfs dag get' instead.
  
  Note that the "--encoding" option does not affect the output, since the output
  is the raw data of the object.


# ipfs object diff

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs object diff <obj_a> <obj_b> - Display the diff between two IPFS objects.

SYNOPSIS
  ipfs object diff [--verbose | -v] [--] <obj_a> <obj_b>

ARGUMENTS

  <obj_a> - Object to diff against.
  <obj_b> - Object to diff.

OPTIONS

  -v, --verbose  bool - Print extra information.

DESCRIPTION

  'ipfs object diff' is a command used to show the differences between
  two IPFS objects.
  
  Example:
  
     > ls foo
     bar baz/ giraffe
     > ipfs add -r foo
     ...
     Added QmegHcnrPgMwC7tBiMxChD54fgQMBUecNw9nE9UUU4x1bz foo
     > OBJ_A=QmegHcnrPgMwC7tBiMxChD54fgQMBUecNw9nE9UUU4x1bz
     > echo "different content" > foo/bar
     > ipfs add -r foo
     ...
     Added QmcmRptkSPWhptCttgHg27QNDmnV33wAJyUkCnAvqD3eCD foo
     > OBJ_B=QmcmRptkSPWhptCttgHg27QNDmnV33wAJyUkCnAvqD3eCD
     > ipfs object diff -v $OBJ_A $OBJ_B
     Changed "bar" from QmNgd5cz2jNftnAHBhcRUGdtiaMzb5Rhjqd4etondHHST8 to QmRfFVsjSXkhFxrfWnLpMae2M4GBVsry6VAuYYcji5MiZb.


# ipfs object get

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs object get <key> - Deprecated way to get and serialize the dag-pb node.
                          Use 'dag get' instead

SYNOPSIS
  ipfs object get [--data-encoding=<data-encoding>] [--] <key>

ARGUMENTS

  <key> - Key of the dag-pb object to retrieve, in base58-encoded multihash
          format.

OPTIONS

  --data-encoding  string - Encoding type of the data field, either "text" or
                            "base64". Default: text.

DESCRIPTION

  'ipfs object get' is a plumbing command for retrieving dag-pb nodes.
  It serializes the DAG node to the format specified by the "--encoding"
  flag. It outputs to stdout, and <key> is a base58 encoded multihash.
  
  DEPRECATED and provided for legacy reasons. Use 'ipfs dag get' instead.


WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs object links <key> - Deprecated way to output links in the specified
                            dag-pb object: use 'dag get' instead.

SYNOPSIS
  ipfs object links [--headers | -v] [--] <key>

ARGUMENTS

  <key> - Key of the dag-pb object to retrieve, in base58-encoded multihash
          format.

OPTIONS

  -v, --headers  bool - Print table headers (Hash, Size, Name).

DESCRIPTION

  'ipfs object links' is a plumbing command for retrieving the links from
  a dag-pb node. It outputs to stdout, and <key> is a base58 encoded
  multihash. Provided for legacy reasons. Use 'ipfs dag get' instead.


# ipfs object new

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs object new [<template>] - Deprecated way to create a new dag-pb object
                                 from a template.

SYNOPSIS
  ipfs object new [--] [<template>]

ARGUMENTS

  [<template>] - Template to use. Optional.

DESCRIPTION

  'ipfs object new' is a plumbing command for creating new dag-pb nodes.
  By default it creates and returns a new empty merkledag node, but
  you may pass an optional template argument to create a preformatted
  node.
  
  Available templates:
  	* unixfs-dir
  
  DEPRECATED and provided for legacy reasons. Use 'dag put' and 'files' instead.


# ipfs object patch

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs object patch - Deprecated way to create a new merkledag object based on
                      an existing one. Use MFS with 'files cp|rm' instead.

SYNOPSIS
  ipfs object patch [--allow-big-block]

OPTIONS

  --allow-big-block  bool - Disable block size check and allow creation of
                            blocks bigger than 1MiB. WARNING: such blocks won't
                            be transferable over the standard bitswap. Default:
                            false.

DESCRIPTION

  'ipfs object patch <root> <cmd> <args>' is a plumbing command used to
  build custom dag-pb objects. It mutates objects, creating new objects as a
  result. This is the Merkle-DAG version of modifying an object.
  
  DEPRECATED and provided for legacy reasons.
  For modern use cases, use MFS with 'files' commands: 'ipfs files --help'.
  
    $ ipfs files cp /ipfs/QmUNLLsPACCz1vLxQVkXqqLX5R1X345qqfHbsf67hvA3Nn /some-dir
    $ ipfs files cp /ipfs/Qmayz4F4UzqcAMitTzU4zCSckDofvxstDuj3y7ajsLLEVs /some-dir/added-file.jpg
    $ ipfs files stat --hash /some-dir
  
    The above will add 'added-file.jpg' to the directory placed under /some-dir
    and the CID of updated directory is returned by 'files stat'
  
    'files cp' does not download the data, only the root block, which makes it
    possible to build arbitrary directory trees without fetching them in full to
    the local node.

DEPRECATED SUBCOMMANDS
  ipfs object patch add-link <root> <name> <ref> - Deprecated way to add a link to a given dag-pb.
  ipfs object patch append-data <root> <data>    - Deprecated way to append data to the data segment of a DAG node.
  ipfs object patch rm-link <root> <name>        - Deprecated way to remove a link from dag-pb object.
  ipfs object patch set-data <root> <data>       - Deprecated way to set the data field of dag-pb object.


WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs object patch add-link <root> <name> <ref> - Deprecated way to add a link to a given dag-pb.

SYNOPSIS
  ipfs object patch add-link [--create | -p] [--] <root> <name> <ref>

ARGUMENTS

  <root> - The hash of the node to modify.
  <name> - Name of link to create.
  <ref>  - IPFS object to add link to.

OPTIONS

  -p, --create  bool - Create intermediary nodes.

DESCRIPTION

  Add a Merkle-link to the given object and return the hash of the result.
  
  DEPRECATED and provided for legacy reasons.
  
  Use MFS and 'files' commands instead:
  
    $ ipfs files cp /ipfs/QmUNLLsPACCz1vLxQVkXqqLX5R1X345qqfHbsf67hvA3Nn /some-dir
    $ ipfs files cp /ipfs/Qmayz4F4UzqcAMitTzU4zCSckDofvxstDuj3y7ajsLLEVs /some-dir/added-file.jpg
    $ ipfs files stat --hash /some-dir
  
    The above will add 'added-file.jpg' to the directory placed under /some-dir
    and the CID of updated directory is returned by 'files stat'
  
    'files cp' does not download the data, only the root block, which makes it
    possible to build arbitrary directory trees without fetching them in full to
    the local node.


# ipfs object patch append-data

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs object patch append-data <root> <data> - Deprecated way to append data
                                                to the data segment of a DAG
                                                node.

SYNOPSIS
  ipfs object patch append-data [--] <root> <data>

ARGUMENTS

  <root> - The hash of the node to modify.
  <data> - Data to append.

DESCRIPTION

  Append data to what already exists in the data segment in the given object.
  
  Example:
  
  	$ echo "hello" | ipfs object patch $HASH append-data
  
  NOTE: This does not append data to a file - it modifies the actual raw
  data within a dag-pb object. Blocks have a max size of 1MiB and objects larger than
  the limit will not be respected by the network.
  
  DEPRECATED and provided for legacy reasons. Use 'ipfs add' or 'ipfs files' instead.


WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs object patch rm-link <root> <name> - Deprecated way to remove a link
                                            from dag-pb object.

SYNOPSIS
  ipfs object patch rm-link [--] <root> <name>

ARGUMENTS

  <root> - The hash of the node to modify.
  <name> - Name of the link to remove.

DESCRIPTION

  Remove a Merkle-link from the given object and return the hash of the result.
  
  DEPRECATED and provided for legacy reasons. Use 'files rm' instead.


# ipfs object patch set-data

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs object patch set-data <root> <data> - Deprecated way to set the data
                                             field of dag-pb object.

SYNOPSIS
  ipfs object patch set-data [--] <root> <data>

ARGUMENTS

  <root> - The hash of the node to modify.
  <data> - The data to set the object to.

DESCRIPTION

  Set the data of an IPFS object from stdin or with the contents of a file.
  
  Example:
  
      $ echo "my data" | ipfs object patch $MYHASH set-data
  
  DEPRECATED and provided for legacy reasons. Use 'files cp' and 'dag put' instead.


# ipfs object put

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs object put <data> - Deprecated way to store input as a DAG object. Use
                           'dag put' instead.

SYNOPSIS
  ipfs object put [--inputenc=<inputenc>] [--datafieldenc=<datafieldenc>]
                  [--pin] [--quiet | -q] [--] <data>

ARGUMENTS

  <data> - Data to be stored as a dag-pb object.

OPTIONS

  --inputenc      string - Encoding type of input data. One of: {"protobuf",
                           "json"}. Default: json.
  --datafieldenc  string - Encoding type of the data field, either "text" or
                           "base64". Default: text.
  --pin           bool   - Pin this object when adding.
  -q, --quiet     bool   - Write minimal output.

DESCRIPTION

  'ipfs object put' is a plumbing command for storing dag-pb nodes.
  It reads from stdin, and the output is a base58 encoded multihash.
  
  DEPRECATED and provided for legacy reasons. Use 'ipfs dag put' instead.


# ipfs object stat

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs object stat <key> - Deprecated way to read stats for the dag-pb node.
                           Use 'files stat' instead.

SYNOPSIS
  ipfs object stat [--human] [--] <key>

ARGUMENTS

  <key> - Key of the object to retrieve, in base58-encoded multihash format.

OPTIONS

  --human  bool - Print sizes in human readable format (e.g., 1K 234M 2G).

DESCRIPTION

  'ipfs object stat' is a plumbing command to print dag-pb node statistics.
  <key> is a base58 encoded multihash. It outputs to stdout:
  
  	NumLinks        int number of links in link table
  	BlockSize       int size of the raw, encoded data
  	LinksSize       int size of the links segment
  	DataSize        int size of the data segment
  	CumulativeSize  int cumulative size of object and its references
  
  DEPRECATED: Provided for legacy reasons. Modern replacements:
  
    For unixfs, 'ipfs files stat' can be used:
  
      $ ipfs files stat --with-local /ipfs/QmWfVY9y3xjsixTgbd9AorQxH7VtMpzfx2HaWtsoUYecaX
  	QmWfVY9y3xjsixTgbd9AorQxH7VtMpzfx2HaWtsoUYecaX
  	Size: 5
  	CumulativeSize: 13
  	ChildBlocks: 0
  	Type: file
  	Local: 13 B of 13 B (100.00%)
  
    Reported sizes are based on metadata present in root block, and should not be
    trusted.  A slower, but more secure alternative is 'ipfs dag stat', which
    will work for every DAG type.  It comes with a benefit of calculating the
    size by walking the DAG:
  
  	$ ipfs dag stat /ipfs/QmWfVY9y3xjsixTgbd9AorQxH7VtMpzfx2HaWtsoUYecaX
  	Size: 13, NumBlocks: 1


# ipfs p2p

WARNING:   EXPERIMENTAL, command may change in future releases

USAGE
  ipfs p2p - Libp2p stream mounting.

SYNOPSIS
  ipfs p2p

DESCRIPTION

  Create and use tunnels to remote peers over libp2p
  
  Note: this command is experimental and subject to change as usecases and APIs
  are refined

EXPERIMENTAL SUBCOMMANDS
  ipfs p2p close                                                - Stop listening for new connections to forward.
  ipfs p2p forward <protocol> <listen-address> <target-address> - Forward connections to libp2p service.
  ipfs p2p listen <protocol> <target-address>                   - Create libp2p service.
  ipfs p2p ls                                                   - List active p2p listeners.
  ipfs p2p stream                                               - P2P stream management.


# ipfs p2p close

WARNING:   EXPERIMENTAL, command may change in future releases

USAGE
  ipfs p2p close - Stop listening for new connections to forward.

SYNOPSIS
  ipfs p2p close [--all | -a] [--protocol=<protocol> | -p]
                 [--listen-address=<listen-address> | -l]
                 [--target-address=<target-address> | -t]

OPTIONS

  -a, --all             bool   - Close all listeners.
  -p, --protocol        string - Match protocol name.
  -l, --listen-address  string - Match listen address.
  -t, --target-address  string - Match target address.


# ipfs p2p forward

WARNING:   EXPERIMENTAL, command may change in future releases

USAGE
  ipfs p2p forward <protocol> <listen-address> <target-address> - Forward connections to libp2p service.

SYNOPSIS
  ipfs p2p forward [--allow-custom-protocol] [--] <protocol> <listen-address>
                   <target-address>

ARGUMENTS

  <protocol>       - Protocol name.
  <listen-address> - Listening endpoint.
  <target-address> - Target endpoint.

OPTIONS

  --allow-custom-protocol  bool - Don't require /x/ prefix.

DESCRIPTION

  Forward connections made to <listen-address> to <target-address>.
  
  <protocol> specifies the libp2p protocol name to use for libp2p
  connections and/or handlers. It must be prefixed with '/x/'.
  
  Example:
    ipfs p2p forward /x/myproto /ip4/127.0.0.1/tcp/4567 /p2p/QmPeer
      - Forward connections to 127.0.0.1:4567 to '/x/myproto' service on /p2p/QmPeer


# ipfs p2p listen

WARNING:   EXPERIMENTAL, command may change in future releases

USAGE
  ipfs p2p listen <protocol> <target-address> - Create libp2p service.

SYNOPSIS
  ipfs p2p listen [--allow-custom-protocol] [--report-peer-id | -r] [--]
                  <protocol> <target-address>

ARGUMENTS

  <protocol>       - Protocol name.
  <target-address> - Target endpoint.

OPTIONS

  --allow-custom-protocol  bool - Don't require /x/ prefix.
  -r, --report-peer-id     bool - Send remote base58 peerid to target when a
                                  new connection is established.

DESCRIPTION

  Create libp2p service and forward connections made to <target-address>.
  
  <protocol> specifies the libp2p handler name. It must be prefixed with '/x/'.
  
  Example:
    ipfs p2p listen /x/myproto /ip4/127.0.0.1/tcp/1234
      - Forward connections to 'myproto' libp2p service to 127.0.0.1:1234


# ipfs p2p ls

WARNING:   EXPERIMENTAL, command may change in future releases

USAGE
  ipfs p2p ls - List active p2p listeners.

SYNOPSIS
  ipfs p2p ls [--headers | -v]

OPTIONS

  -v, --headers  bool - Print table headers (Protocol, Listen, Target).


# ipfs p2p stream

WARNING:   EXPERIMENTAL, command may change in future releases

USAGE
  ipfs p2p stream - P2P stream management.

SYNOPSIS
  ipfs p2p stream

DESCRIPTION

  Create and manage p2p streams

EXPERIMENTAL SUBCOMMANDS
  ipfs p2p stream close [<id>] - Close active p2p stream.
  ipfs p2p stream ls           - List active p2p streams.


# ipfs p2p stream close

WARNING:   EXPERIMENTAL, command may change in future releases

USAGE
  ipfs p2p stream close [<id>] - Close active p2p stream.

SYNOPSIS
  ipfs p2p stream close [--all | -a] [--] [<id>]

ARGUMENTS

  [<id>] - Stream identifier

OPTIONS

  -a, --all  bool - Close all streams.


# ipfs p2p stream ls

WARNING:   EXPERIMENTAL, command may change in future releases

USAGE
  ipfs p2p stream ls - List active p2p streams.

SYNOPSIS
  ipfs p2p stream ls [--headers | -v]

OPTIONS

  -v, --headers  bool - Print table headers (ID, Protocol, Local, Remote).


# ipfs pin

USAGE
  ipfs pin - Pin (and unpin) objects to local storage.

SYNOPSIS
  ipfs pin

SUBCOMMANDS
  ipfs pin add <ipfs-path>...           - Pin objects to local storage.
  ipfs pin ls [<ipfs-path>]...          - List objects pinned to local storage.
  ipfs pin remote                       - Pin (and unpin) objects to remote
                                          pinning service.
  ipfs pin rm <ipfs-path>...            - Remove object from pin-list.
  ipfs pin update <from-path> <to-path> - Update a recursive pin.
  ipfs pin verify                       - Verify that recursive pins are
                                          complete.

  For more information about each command, use:
  'ipfs pin <subcmd> --help'


# ipfs pin add

USAGE
  ipfs pin add <ipfs-path>... - Pin objects to local storage.

SYNOPSIS
  ipfs pin add [--recursive=false] [--progress] [--] <ipfs-path>...

ARGUMENTS

  <ipfs-path>... - Path to object(s) to be pinned.

OPTIONS

  -r, --recursive  bool - Recursively pin the object linked to by the specified
                          object(s). Default: true.
  --progress       bool - Show progress.

DESCRIPTION

  Stores an IPFS object(s) from a given path locally to disk.


# ipfs pin ls

USAGE
  ipfs pin ls [<ipfs-path>]... - List objects pinned to local storage.

SYNOPSIS
  ipfs pin ls [--type=<type> | -t] [--quiet | -q] [--stream | -s] [--]
              [<ipfs-path>...]

ARGUMENTS

  [<ipfs-path>]... - Path to object(s) to be listed.

OPTIONS

  -t, --type    string - The type of pinned keys to list. Can be "direct",
                         "indirect", "recursive", or "all". Default: all.
  -q, --quiet   bool   - Write just hashes of objects.
  -s, --stream  bool   - Enable streaming of pins as they are discovered.

DESCRIPTION

  Returns a list of objects that are pinned locally.
  By default, all pinned objects are returned, but the '--type' flag or
  arguments can restrict that to a specific pin type or to some specific objects
  respectively.
  
  Use --type=<type> to specify the type of pinned keys to list.
  Valid values are:
      * "direct": pin that specific object.
      * "recursive": pin that specific object, and indirectly pin all its
      	descendants
      * "indirect": pinned indirectly by an ancestor (like a refcount)
      * "all"
  
  With arguments, the command fails if any of the arguments is not a pinned
  object. And if --type=<type> is additionally used, the command will also fail
  if any of the arguments is not of the specified type.
  
  Example:
  	$ echo "hello" | ipfs add -q
  	QmZULkCELmmk5XNfCgTnCyFgAVxBRBXyDHGGMVoLFLiXEN
  	$ ipfs pin ls
  	QmZULkCELmmk5XNfCgTnCyFgAVxBRBXyDHGGMVoLFLiXEN recursive
  	# now remove the pin, and repin it directly
  	$ ipfs pin rm QmZULkCELmmk5XNfCgTnCyFgAVxBRBXyDHGGMVoLFLiXEN
  	unpinned QmZULkCELmmk5XNfCgTnCyFgAVxBRBXyDHGGMVoLFLiXEN
  	$ ipfs pin add -r=false QmZULkCELmmk5XNfCgTnCyFgAVxBRBXyDHGGMVoLFLiXEN
  	pinned QmZULkCELmmk5XNfCgTnCyFgAVxBRBXyDHGGMVoLFLiXEN directly
  	$ ipfs pin ls --type=direct
  	QmZULkCELmmk5XNfCgTnCyFgAVxBRBXyDHGGMVoLFLiXEN direct
  	$ ipfs pin ls QmZULkCELmmk5XNfCgTnCyFgAVxBRBXyDHGGMVoLFLiXEN
  	QmZULkCELmmk5XNfCgTnCyFgAVxBRBXyDHGGMVoLFLiXEN direct


# ipfs pin remote

USAGE
  ipfs pin remote - Pin (and unpin) objects to remote pinning service.

SYNOPSIS
  ipfs pin remote

SUBCOMMANDS
  ipfs pin remote add <ipfs-path> - Pin object to remote pinning service.
  ipfs pin remote ls              - List objects pinned to remote pinning
                                    service.
  ipfs pin remote rm              - Remove pins from remote pinning service.
  ipfs pin remote service         - Configure remote pinning services.

  For more information about each command, use:
  'ipfs pin remote <subcmd> --help'


# ipfs pin remote add

USAGE
  ipfs pin remote add <ipfs-path> - Pin object to remote pinning service.

SYNOPSIS
  ipfs pin remote add [--service=<service>] [--name=<name>] [--background] [--]
                      <ipfs-path>

ARGUMENTS

  <ipfs-path> - CID or Path to be pinned.

OPTIONS

  --service     string - Name of the remote pinning service to use (mandatory).
  --name        string - An optional name for the pin.
  --background  bool   - Add to the queue on the remote service and return
                         immediately (does not wait for pinned status).
                         Default: false.

DESCRIPTION

  Asks remote pinning service to pin an IPFS object from a given path or a CID.
  
  To pin CID 'bafkqaaa' to service named 'mysrv' under a pin named 'mypin':
  
    $ ipfs pin remote add --service=mysrv --name=mypin bafkqaaa
  
  The above command will block until remote service returns 'pinned' status,
  which may take time depending on the size and available providers of the pinned
  data.
  
  If you prefer to not wait for pinning confirmation and return immediately
  after remote service confirms 'queued' status, add the '--background' flag:
  
    $ ipfs pin remote add --service=mysrv --name=mypin --background bafkqaaa
  
  Status of background pin requests can be inspected with the 'ls' command.
  
  To list all pins for the CID across all statuses:
  
    $ ipfs pin remote ls --service=mysrv --cid=bafkqaaa --status=queued \
        --status=pinning --status=pinned --status=failed
  
  NOTE: a comma-separated notation is supported in CLI for convenience:
  
    $ ipfs pin remote ls --service=mysrv --cid=bafkqaaa --status=queued,pinning,pinned,failed


# ipfs pin remote ls

USAGE
  ipfs pin remote ls - List objects pinned to remote pinning service.

SYNOPSIS
  ipfs pin remote ls [--service=<service>] [--name=<name>] [--cid=<cid>]...
                     [--status=<status>]...

OPTIONS

  --service  string - Name of the remote pinning service to use (mandatory).
  --name     string - Return pins with names that contain the value provided
                      (case-sensitive, exact match).
  --cid      array  - Return pins for the specified CIDs (comma-separated).
  --status   array  - Return pins with the specified statuses
                      (queued,pinning,pinned,failed). Default: [pinned].

DESCRIPTION

  Returns a list of objects that are pinned to a remote pinning service.
  
  NOTE: By default, it will only show matching objects in 'pinned' state.
  Pass '--status=queued,pinning,pinned,failed' to list pins in all states.


# ipfs pin remote rm

USAGE
  ipfs pin remote rm - Remove pins from remote pinning service.

SYNOPSIS
  ipfs pin remote rm [--service=<service>] [--name=<name>] [--cid=<cid>]...
                     [--status=<status>]... [--force]

OPTIONS

  --service  string - Name of the remote pinning service to use (mandatory).
  --name     string - Remove pins with names that contain provided value
                      (case-sensitive, exact match).
  --cid      array  - Remove pins for the specified CIDs.
  --status   array  - Remove pins with the specified statuses
                      (queued,pinning,pinned,failed). Default: [pinned].
  --force    bool   - Allow removal of multiple pins matching the query without
                      additional confirmation. Default: false.

DESCRIPTION

  Removes remote pins, allowing them to be garbage-collected if needed.
  
  This command accepts the same search query parameters as 'ls', and it is good
  practice to execute 'ls' before 'rm' to confirm the list of pins to be removed.
  
  To remove a single pin for a specific CID:
  
    $ ipfs pin remote ls --service=mysrv --cid=bafkqaaa
    $ ipfs pin remote rm --service=mysrv --cid=bafkqaaa
  
  When more than one pin matches the query on the remote service, an error is
  returned.  To confirm the removal of multiple pins, pass '--force':
  
    $ ipfs pin remote ls --service=mysrv --name=popular-name
    $ ipfs pin remote rm --service=mysrv --name=popular-name --force
  
  NOTE: When no '--status' is passed, implicit '--status=pinned' is used.
  To list and then remove all pending pin requests, pass an explicit status list:
  
    $ ipfs pin remote ls --service=mysrv --status=queued,pinning,failed
    $ ipfs pin remote rm --service=mysrv --status=queued,pinning,failed --force


# ipfs pin remote service

USAGE
  ipfs pin remote service - Configure remote pinning services.

SYNOPSIS
  ipfs pin remote service

SUBCOMMANDS
  ipfs pin remote service add <service> <endpoint> <key> - Add remote pinning service.
  ipfs pin remote service ls                             - List remote pinning services.
  ipfs pin remote service rm <service>                   - Remove remote pinning service.

  For more information about each command, use:
  'ipfs pin remote service <subcmd> --help'


# ipfs pin remote service add

USAGE
  ipfs pin remote service add <service> <endpoint> <key> - Add remote pinning service.

SYNOPSIS
  ipfs pin remote service add [--] <service> <endpoint> <key>

ARGUMENTS

  <service>  - Service name.
  <endpoint> - Service endpoint.
  <key>      - Service key.

DESCRIPTION

  Add credentials for access to a remote pinning service and store them in the
  config under Pinning.RemoteServices map.
  
  TIP:
  
    To add services and test them by fetching pin count stats:
  
    $ ipfs pin remote service add goodsrv https://pin-api.example.com secret-key
    $ ipfs pin remote service add badsrv  https://bad-api.example.com invalid-key
    $ ipfs pin remote service ls --stat
    goodsrv   https://pin-api.example.com 0/0/0/0
    badsrv    https://bad-api.example.com invalid


# ipfs pin remote service ls

USAGE
  ipfs pin remote service ls - List remote pinning services.

SYNOPSIS
  ipfs pin remote service ls [--stat]

OPTIONS

  --stat  bool - Try to fetch and display current pin count on remote service
                 (queued/pinning/pinned/failed). Default: false.

DESCRIPTION

  List remote pinning services.
  
  By default, only a name and an endpoint are listed; however, one can pass
  '--stat' to test each endpoint by fetching pin counts for each state:
  
    $ ipfs pin remote service ls --stat
    goodsrv   https://pin-api.example.com 0/0/0/0
    badsrv    https://bad-api.example.com invalid
  
  TIP: pass '--enc=json' for more useful JSON output.


# ipfs pin remote service rm

USAGE
  ipfs pin remote service rm <service> - Remove remote pinning service.

SYNOPSIS
  ipfs pin remote service rm [--] <service>

ARGUMENTS

  <service> - Name of remote pinning service to remove.

DESCRIPTION

  Remove credentials for access to a remote pinning service.


# ipfs pin rm

USAGE
  ipfs pin rm <ipfs-path>... - Remove object from pin-list.

SYNOPSIS
  ipfs pin rm [--recursive=false] [--] <ipfs-path>...

ARGUMENTS

  <ipfs-path>... - Path to object(s) to be unpinned.

OPTIONS

  -r, --recursive  bool - Recursively unpin the object linked to by the
                          specified object(s). Default: true.

DESCRIPTION

  Removes the pin from the given object allowing it to be garbage
  collected if needed. (By default, recursively. Use -r=false for direct pins.)
  
  A pin may not be removed because the specified object is not pinned or pinned
  indirectly. To determine if the object is pinned indirectly, use the command:
  ipfs pin ls -t indirect <cid>


# ipfs pin update

USAGE
  ipfs pin update <from-path> <to-path> - Update a recursive pin.

SYNOPSIS
  ipfs pin update [--unpin=false] [--] <from-path> <to-path>

ARGUMENTS

  <from-path> - Path to old object.
  <to-path>   - Path to a new object to be pinned.

OPTIONS

  --unpin  bool - Remove the old pin. Default: true.

DESCRIPTION

  Efficiently pins a new object based on differences from an existing one and,
  by default, removes the old pin.
  
  This command is useful when the new pin contains many similarities or is a
  derivative of an existing one, particularly for large objects. This allows a more
  efficient DAG-traversal which fully skips already-pinned branches from the old
  object. As a requirement, the old object needs to be an existing recursive
  pin.


# ipfs pin verify

USAGE
  ipfs pin verify - Verify that recursive pins are complete.

SYNOPSIS
  ipfs pin verify [--verbose] [--quiet | -q]

OPTIONS

  --verbose    bool - Also write the hashes of non-broken pins.
  -q, --quiet  bool - Write just hashes of broken pins.


# ipfs ping

USAGE
  ipfs ping <peer ID>... - Send echo request packets to IPFS hosts.

SYNOPSIS
  ipfs ping [--count=<count> | -n] [--] <peer ID>...

ARGUMENTS

  <peer ID>... - ID of peer to be pinged.

OPTIONS

  -n, --count  int - Number of ping messages to send. Default: 10.

DESCRIPTION

  'ipfs ping' is a tool to test sending data to other nodes. It finds nodes
  via the routing system, sends pings, waits for pongs, and prints out round-
  trip latency information.
  		


# ipfs pubsub

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs pubsub - An experimental publish-subscribe system on ipfs.

SYNOPSIS
  ipfs pubsub

DESCRIPTION

  ipfs pubsub allows you to publish messages to a given topic, and also to
  subscribe to new messages on a given topic.
  
  DEPRECATED FEATURE (see https://github.com/ipfs/kubo/issues/9717)
  
    It is not intended in its current state to be used in a production
    environment.  To use, the daemon must be run with
    '--enable-pubsub-experiment'.

DEPRECATED SUBCOMMANDS
  ipfs pubsub ls                 - List subscribed topics by name.
  ipfs pubsub peers [<topic>]    - List peers we are currently pubsubbing with.
  ipfs pubsub pub <topic> <data> - Publish data to a given pubsub topic.
  ipfs pubsub sub <topic>        - Subscribe to messages on a given topic.


# ipfs pubsub ls

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs pubsub ls - List subscribed topics by name.

SYNOPSIS
  ipfs pubsub ls

DESCRIPTION

  ipfs pubsub ls lists out the names of topics you are currently subscribed to.
  
  DEPRECATED FEATURE (see https://github.com/ipfs/kubo/issues/9717)
  
    It is not intended in its current state to be used in a production
    environment.  To use, the daemon must be run with
    '--enable-pubsub-experiment'.
  
  TOPIC ENCODING
  
    Topic names are a binary data. To ensure all bytes are transferred
    correctly RPC client and server will use multibase encoding behind
    the scenes.
  
    You can inspect the format by passing --enc=json. ipfs multibase commands
    can be used for encoding/decoding multibase strings in the userland.


# ipfs pubsub peers

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs pubsub peers [<topic>] - List peers we are currently pubsubbing with.

SYNOPSIS
  ipfs pubsub peers [--] [<topic>]

ARGUMENTS

  [<topic>] - Topic to list connected peers of.

DESCRIPTION

  ipfs pubsub peers with no arguments lists out the pubsub peers you are
  currently connected to. If given a topic, it will list connected peers who are
  subscribed to the named topic.
  
  DEPRECATED FEATURE (see https://github.com/ipfs/kubo/issues/9717)
  
    It is not intended in its current state to be used in a production
    environment.  To use, the daemon must be run with
    '--enable-pubsub-experiment'.
  
  TOPIC AND DATA ENCODING
  
    Topic names are a binary data. To ensure all bytes are transferred
    correctly RPC client and server will use multibase encoding behind
    the scenes.
  
    You can inspect the format by passing --enc=json. ipfs multibase commands
    can be used for encoding/decoding multibase strings in the userland.


# ipfs pubsub pub

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs pubsub pub <topic> <data> - Publish data to a given pubsub topic.

SYNOPSIS
  ipfs pubsub pub [--] <topic> <data>

ARGUMENTS

  <topic> - Topic to publish to (multibase encoded when sent over HTTP RPC).
  <data>  - The data to be published.

DESCRIPTION

  ipfs pubsub pub publishes a message to a specified topic.
  It reads binary data from stdin or a file.
  
  DEPRECATED FEATURE (see https://github.com/ipfs/kubo/issues/9717)
  
    It is not intended in its current state to be used in a production
    environment.  To use, the daemon must be run with
    '--enable-pubsub-experiment'.
  
  HTTP RPC ENCODING
  
    The data to be published is sent in HTTP request body as multipart/form-data.
  
    Topic names are binary data too. To ensure all bytes are transferred
    correctly via URL params, the RPC client and server will use multibase
    encoding behind the scenes.


# ipfs pubsub sub

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs pubsub sub <topic> - Subscribe to messages on a given topic.

SYNOPSIS
  ipfs pubsub sub [--] <topic>

ARGUMENTS

  <topic> - Name of topic to subscribe to (multibase encoded when sent over
            HTTP RPC).

DESCRIPTION

  ipfs pubsub sub subscribes to messages on a given topic.
  
  DEPRECATED FEATURE (see https://github.com/ipfs/kubo/issues/9717)
  
    It is not intended in its current state to be used in a production
    environment.  To use, the daemon must be run with
    '--enable-pubsub-experiment'.
  
  PEER ENCODING
  
    Peer IDs in From fields are encoded using the default text representation
    from go-libp2p. This ensures the same string values as in 'ipfs pubsub peers'.
  
  TOPIC AND DATA ENCODING
  
    Topics, Data and Seqno are binary data. To ensure all bytes are transferred
    correctly the RPC client and server will use multibase encoding behind
    the scenes.
  
    You can inspect the format by passing --enc=json. The ipfs multibase commands
    can be used for encoding/decoding multibase strings in the userland.


# ipfs refs

USAGE
  ipfs refs <ipfs-path>... - List links (references) from an object.

SYNOPSIS
  ipfs refs [--format=<format>] [--edges | -e] [--unique | -u]
            [--recursive | -r] [--max-depth=<max-depth>] [--] <ipfs-path>...

ARGUMENTS

  <ipfs-path>... - Path to the object(s) to list refs from.

OPTIONS

  --format         string - Emit edges with given format. Available tokens:
                            <src> <dst> <linkname>. Default: <dst>.
  -e, --edges      bool   - Emit edge format: `<from> -> <to>`.
  -u, --unique     bool   - Omit duplicate refs from output.
  -r, --recursive  bool   - Recursively list links of child nodes.
  --max-depth      int    - Only for recursive refs, limits fetch and listing
                            to the given depth. Default: -1.

DESCRIPTION

  Lists the hashes of all the links an IPFS or IPNS object(s) contains,
  with the following format:
  
    <link base58 hash>
  
  List all references recursively by using the flag '-r'.
  
  NOTE: Like most other commands, Kubo will try to fetch the blocks of the passed path if they can't be found in the local store if it is running in online mode.

SUBCOMMANDS
  ipfs refs local - List all local references.

  For more information about each command, use:
  'ipfs refs <subcmd> --help'


# ipfs refs local

USAGE
  ipfs refs local - List all local references.

SYNOPSIS
  ipfs refs local

DESCRIPTION

  Displays the hashes of all local objects. NOTE: This treats all local objects as "raw blocks" and returns CIDv1-Raw CIDs.


# ipfs repo

USAGE
  ipfs repo - Manipulate the IPFS repo.

SYNOPSIS
  ipfs repo

DESCRIPTION

  'ipfs repo' is a plumbing command used to manipulate the repo.

SUBCOMMANDS
  ipfs repo gc      - Perform a garbage collection sweep on the repo.
  ipfs repo ls      - List all local references.
  ipfs repo migrate - Apply any outstanding migrations to the repo.
  ipfs repo stat    - Get stats for the currently used repo.
  ipfs repo verify  - Verify all blocks in repo are not corrupted.
  ipfs repo version - Show the repo version.

  For more information about each command, use:
  'ipfs repo <subcmd> --help'

DEPRECATED SUBCOMMANDS
  ipfs repo fsck - Remove repo lockfiles.


# ipfs repo fsck

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs repo fsck - Remove repo lockfiles.

SYNOPSIS
  ipfs repo fsck

DESCRIPTION

  'ipfs repo fsck' is now a no-op.


# ipfs repo gc

USAGE
  ipfs repo gc - Perform a garbage collection sweep on the repo.

SYNOPSIS
  ipfs repo gc [--stream-errors] [--quiet | -q] [--silent]

OPTIONS

  --stream-errors  bool - Stream errors.
  -q, --quiet      bool - Write minimal output.
  --silent         bool - Write no output.

DESCRIPTION

  'ipfs repo gc' is a plumbing command that will sweep the local
  set of stored objects and remove ones that are not pinned in
  order to reclaim hard disk space.


# ipfs repo ls

USAGE
  ipfs repo ls - List all local references.

SYNOPSIS
  ipfs repo ls

DESCRIPTION

  Displays the hashes of all local objects. NOTE: This treats all local objects as "raw blocks" and returns CIDv1-Raw CIDs.


# ipfs repo migrate

USAGE
  ipfs repo migrate - Apply any outstanding migrations to the repo.

SYNOPSIS
  ipfs repo migrate [--allow-downgrade]

OPTIONS

  --allow-downgrade  bool - Allow downgrading to a lower repo version.


# ipfs repo stat

USAGE
  ipfs repo stat - Get stats for the currently used repo.

SYNOPSIS
  ipfs repo stat [--size-only | -s] [--human | -H]

OPTIONS

  -s, --size-only  bool - Only report RepoSize and StorageMax.
  -H, --human      bool - Print sizes in human readable format (e.g., 1K 234M
                          2G).

DESCRIPTION

  'ipfs repo stat' provides information about the local set of
  stored objects. It outputs:
  
  RepoSize        int Size in bytes that the repo is currently taking.
  StorageMax      string Maximum datastore size (from configuration)
  NumObjects      int Number of objects in the local repo.
  RepoPath        string The path to the repo being currently used.
  Version         string The repo version.


# ipfs repo verify

USAGE
  ipfs repo verify - Verify all blocks in repo are not corrupted.

SYNOPSIS
  ipfs repo verify


# ipfs repo version

USAGE
  ipfs repo version - Show the repo version.

SYNOPSIS
  ipfs repo version [--quiet | -q]

OPTIONS

  -q, --quiet  bool - Write minimal output.

DESCRIPTION

  'ipfs repo version' returns the current repo version.


# ipfs resolve

USAGE
  ipfs resolve <name> - Resolve the value of names to IPFS.

SYNOPSIS
  ipfs resolve [--recursive=false]
               [--dht-record-count=<dht-record-count> | --dhtrc]
               [--dht-timeout=<dht-timeout> | --dhtt] [--] <name>

ARGUMENTS

  <name> - The name to resolve.

OPTIONS

  -r, --recursive              bool   - Resolve until the result is an IPFS
                                        name. Default: true.
  --dhtrc, --dht-record-count  int    - Number of records to request for DHT
                                        resolution.
  --dhtt, --dht-timeout        string - Max time to collect values during DHT
                                        resolution eg "30s". Pass 0 for no
                                        timeout.

DESCRIPTION

  There are a number of mutable name protocols that can link among
  themselves and into IPNS. For example IPNS references can (currently)
  point at an IPFS object, and DNS links can point at other DNS links, IPNS
  entries, or IPFS objects. This command accepts any of these
  identifiers and resolves them to the referenced item.
  
  EXAMPLES
  
  Resolve the value of your identity:
  
    $ ipfs resolve /ipns/QmatmE9msSfkKxoffpHwNLNKgwZG8eT9Bud6YoPab52vpy
    /ipfs/Qmcqtw8FfrVSBaRmbWwHxt3AuySBhJLcvmFYi3Lbc4xnwj
  
  Resolve the value of another name:
  
    $ ipfs resolve /ipns/QmbCMUZw6JFeZ7Wp9jkzbye3Fzp2GGcPgC3nmeUjfVF87n
    /ipns/QmatmE9msSfkKxoffpHwNLNKgwZG8eT9Bud6YoPab52vpy
  
  Resolve the value of another name recursively:
  
    $ ipfs resolve -r /ipns/QmbCMUZw6JFeZ7Wp9jkzbye3Fzp2GGcPgC3nmeUjfVF87n
    /ipfs/Qmcqtw8FfrVSBaRmbWwHxt3AuySBhJLcvmFYi3Lbc4xnwj
  
  Resolve the value of an IPFS DAG path:
  
    $ ipfs resolve /ipfs/QmeZy1fGbwgVSrqbfh9fKQrAWgeyRnj7h8fsHS1oy3k99x/beep/boop
    /ipfs/QmYRMjyvAiHKN9UTi8Bzt1HUspmSRD8T8DwxfSMzLgBon1


# ipfs routing

USAGE
  ipfs routing - Issue routing commands.

SYNOPSIS
  ipfs routing

SUBCOMMANDS
  ipfs routing findpeer <peerID>... - Find the multiaddresses associated with a
                                      Peer ID.
  ipfs routing findprovs <key>...   - Find peers that can provide a specific
                                      value, given a key.

  For more information about each command, use:
  'ipfs routing <subcmd> --help'

EXPERIMENTAL SUBCOMMANDS
  ipfs routing get <key>...           - Given a key, query the routing system
                                        for its best value.
  ipfs routing provide <key>...       - Announce to the network that you are
                                        providing given values.
  ipfs routing put <key> <value-file> - Write a key/value pair to the routing
                                        system.


# ipfs routing findpeer

USAGE
  ipfs routing findpeer <peerID>... - Find the multiaddresses associated with a
                                      Peer ID.

SYNOPSIS
  ipfs routing findpeer [--verbose | -v] [--] <peerID>...

ARGUMENTS

  <peerID>... - The ID of the peer to search for.

OPTIONS

  -v, --verbose  bool - Print extra information.

DESCRIPTION

  Outputs a list of newline-delimited multiaddresses.


# ipfs routing findprovs

USAGE
  ipfs routing findprovs <key>... - Find peers that can provide a specific
                                    value, given a key.

SYNOPSIS
  ipfs routing findprovs [--verbose | -v] [--num-providers=<num-providers> | -n]
                         [--] <key>...

ARGUMENTS

  <key>... - The key to find providers for.

OPTIONS

  -v, --verbose        bool - Print extra information.
  -n, --num-providers  int  - The number of providers to find. Default: 20.

DESCRIPTION

  Outputs a list of newline-delimited provider Peer IDs.


# ipfs routing get

WARNING:   EXPERIMENTAL, command may change in future releases

USAGE
  ipfs routing get <key>... - Given a key, query the routing system for its
                              best value.

SYNOPSIS
  ipfs routing get [--] <key>...

ARGUMENTS

  <key>... - The key to find a value for.

DESCRIPTION

  Outputs the best value for the given key.
  
  There may be several different values for a given key stored in the routing
  system; in this context 'best' means the record that is most desirable. There is
  no one metric for 'best': it depends entirely on the key type. For IPNS, 'best'
  is the record that is both valid and has the highest sequence number (freshest).
  Different key types can specify other 'best' rules.


# ipfs routing provide

WARNING:   EXPERIMENTAL, command may change in future releases

USAGE
  ipfs routing provide <key>... - Announce to the network that you are
                                  providing given values.

SYNOPSIS
  ipfs routing provide [--verbose | -v] [--recursive | -r] [--] <key>...

ARGUMENTS

  <key>... - The key[s] to send provide records for.

OPTIONS

  -v, --verbose    bool - Print extra information.
  -r, --recursive  bool - Recursively provide entire graph.


# ipfs routing put

WARNING:   EXPERIMENTAL, command may change in future releases

USAGE
  ipfs routing put <key> <value-file> - Write a key/value pair to the routing
                                        system.

SYNOPSIS
  ipfs routing put [--allow-offline] [--] <key> <value-file>

ARGUMENTS

  <key>        - The key to store the value at.
  <value-file> - A path to a file containing the value to store.

OPTIONS

  --allow-offline  bool - When offline, save the IPNS record to the the local
                          datastore without broadcasting to the network instead
                          of simply failing.

DESCRIPTION

  Given a key of the form /foo/bar and a valid value for that key, this will write
  that value to the routing system with that key.
  
  Keys have two parts: a keytype (foo) and the key name (bar). IPNS uses the
  /ipns keytype, and expects the key name to be a Peer ID. IPNS entries are
  specifically formatted (protocol buffer).
  
  You may only use keytypes that are supported in your ipfs binary: currently
  this is only /ipns. Unless you have a relatively deep understanding of the
  go-ipfs routing internals, you likely want to be using 'ipfs name publish' instead
  of this.
  
  The value must be a valid value for the given key type. For example, if the key
  is /ipns/QmFoo, the value must be IPNS record (protobuf) signed with the key
  identified by QmFoo.


# ipfs shutdown

USAGE
  ipfs shutdown - Shut down the IPFS daemon.

SYNOPSIS
  ipfs shutdown


# ipfs stats

USAGE
  ipfs stats - Query IPFS statistics.

SYNOPSIS
  ipfs stats

DESCRIPTION

  'ipfs stats' is a set of commands to help look at statistics
  for your IPFS node.

SUBCOMMANDS
  ipfs stats bitswap        - Show some diagnostic information on the bitswap
                              agent.
  ipfs stats bw             - Print IPFS bandwidth information.
  ipfs stats dht [<dht>]... - Returns statistics about the node's DHT(s).
  ipfs stats provide        - Returns statistics about the node's (re)provider
                              system.
  ipfs stats repo           - Get stats for the currently used repo.

  For more information about each command, use:
  'ipfs stats <subcmd> --help'


# ipfs stats bitswap

USAGE
  ipfs stats bitswap - Show some diagnostic information on the bitswap agent.

SYNOPSIS
  ipfs stats bitswap [--verbose | -v] [--human]

OPTIONS

  -v, --verbose  bool - Print extra information.
  --human        bool - Print sizes in human readable format (e.g., 1K 234M 2G).


# ipfs stats bw

USAGE
  ipfs stats bw - Print IPFS bandwidth information.

SYNOPSIS
  ipfs stats bw [--peer=<peer> | -p] [--proto=<proto> | -t] [--poll]
                [--interval=<interval> | -i]

OPTIONS

  -p, --peer      string - Specify a peer to print bandwidth for.
  -t, --proto     string - Specify a protocol to print bandwidth for.
  --poll          bool   - Print bandwidth at an interval.
  -i, --interval  string - Time interval to wait between updating output, if
                           'poll' is true.
  
      This accepts durations such as
                           "300s", "1.5h" or "2h45m". Valid time units are:
     
                           "ns", "us" (or "µs"), "ms", "s", "m", "h". Default:
                           1s.

DESCRIPTION

  'ipfs stats bw' prints bandwidth information for the ipfs daemon.
  It displays: TotalIn, TotalOut, RateIn, RateOut.
  
  By default, overall bandwidth and all protocols are shown. To limit bandwidth
  to a particular peer, use the 'peer' option along with that peer's multihash
  id. To specify a specific protocol, use the 'proto' option. The 'peer' and
  'proto' options cannot be specified simultaneously. The protocols that are
  queried using this method are outlined in the specification:
  https://github.com/libp2p/specs/blob/master/7-properties.md#757-protocol-multicodecs
  
  Example protocol options:
    - /ipfs/id/1.0.0
    - /ipfs/bitswap
    - /ipfs/dht
  
  Example:
  
      > ipfs stats bw -t /ipfs/bitswap
      Bandwidth
      TotalIn: 5.0MB
      TotalOut: 0B
      RateIn: 343B/s
      RateOut: 0B/s
      > ipfs stats bw -p QmepgFW7BHEtU4pZJdxaNiv75mKLLRQnPi1KaaXmQN4V1a
      Bandwidth
      TotalIn: 4.9MB
      TotalOut: 12MB
      RateIn: 0B/s
      RateOut: 0B/s


# ipfs stats dht

USAGE
  ipfs stats dht [<dht>]... - Returns statistics about the node's DHT(s).

SYNOPSIS
  ipfs stats dht [--] [<dht>...]

ARGUMENTS

  [<dht>]... - The DHT whose table should be listed (wanserver, lanserver, wan,
               lan). wan and lan refer to client routing tables. When using the
               experimental DHT client only WAN is supported. Defaults to wan
               and lan.

DESCRIPTION

  Returns statistics about the DHT(s) the node is participating in.
  
  This interface is not stable and may change from release to release.


# ipfs stats provide

USAGE
  ipfs stats provide - Returns statistics about the node's (re)provider system.

SYNOPSIS
  ipfs stats provide

DESCRIPTION

  Returns statistics about the content the node is advertising.
  
  This interface is not stable and may change from release to release.


# ipfs stats repo

USAGE
  ipfs stats repo - Get stats for the currently used repo.

SYNOPSIS
  ipfs stats repo [--size-only | -s] [--human | -H]

OPTIONS

  -s, --size-only  bool - Only report RepoSize and StorageMax.
  -H, --human      bool - Print sizes in human readable format (e.g., 1K 234M
                          2G).

DESCRIPTION

  'ipfs repo stat' provides information about the local set of
  stored objects. It outputs:
  
  RepoSize        int Size in bytes that the repo is currently taking.
  StorageMax      string Maximum datastore size (from configuration)
  NumObjects      int Number of objects in the local repo.
  RepoPath        string The path to the repo being currently used.
  Version         string The repo version.


# ipfs swarm

USAGE
  ipfs swarm - Interact with the swarm.

SYNOPSIS
  ipfs swarm

DESCRIPTION

  'ipfs swarm' is a tool to manipulate the network swarm. The swarm is the
  component that opens, listens for, and maintains connections to other
  ipfs peers in the internet.

SUBCOMMANDS
  ipfs swarm addrs                   - List known addresses. Useful for
                                       debugging.
  ipfs swarm connect <address>...    - Open connection to a given peer.
  ipfs swarm disconnect <address>... - Close connection to a given address.
  ipfs swarm filters                 - Manipulate address filters.
  ipfs swarm peering                 - Modify the peering subsystem.
  ipfs swarm peers                   - List peers with open connections.

  For more information about each command, use:
  'ipfs swarm <subcmd> --help'

EXPERIMENTAL SUBCOMMANDS
  ipfs swarm resources - Get a summary of all resources accounted for by the
                         libp2p Resource Manager.


# ipfs swarm addrs

USAGE
  ipfs swarm addrs - List known addresses. Useful for debugging.

SYNOPSIS
  ipfs swarm addrs

DESCRIPTION

  'ipfs swarm addrs' lists all addresses this node is aware of.

SUBCOMMANDS
  ipfs swarm addrs listen - List interface listening addresses.
  ipfs swarm addrs local  - List local addresses.

  For more information about each command, use:
  'ipfs swarm addrs <subcmd> --help'


# ipfs swarm addrs listen

USAGE
  ipfs swarm addrs listen - List interface listening addresses.

SYNOPSIS
  ipfs swarm addrs listen

DESCRIPTION

  'ipfs swarm addrs listen' lists all interface addresses the node is listening on.


# ipfs swarm addrs local

USAGE
  ipfs swarm addrs local - List local addresses.

SYNOPSIS
  ipfs swarm addrs local [--id]

OPTIONS

  --id  bool - Show peer ID in addresses.

DESCRIPTION

  'ipfs swarm addrs local' lists all local listening addresses announced to the network.


# ipfs swarm connect

USAGE
  ipfs swarm connect <address>... - Open connection to a given peer.

SYNOPSIS
  ipfs swarm connect [--] <address>...

ARGUMENTS

  <address>... - Address of peer to connect to.

DESCRIPTION

  'ipfs swarm connect' attempts to ensure a connection to a given peer.
  
  Multiaddresses given are advisory, for example the node may already be aware of other addresses for a given peer or may already have an established connection to the peer.
  
  The address format is a libp2p multiaddr:
  
  ipfs swarm connect /ip4/104.131.131.82/tcp/4001/p2p/QmaCpDMGvV2BGHeYERUEnRQAwe3N8SzbUtfsmvsqQLuvuJ


# ipfs swarm disconnect

USAGE
  ipfs swarm disconnect <address>... - Close connection to a given address.

SYNOPSIS
  ipfs swarm disconnect [--] <address>...

ARGUMENTS

  <address>... - Address of peer to disconnect from.

DESCRIPTION

  'ipfs swarm disconnect' closes a connection to a peer address. The address
  format is an IPFS multiaddr:
  
  ipfs swarm disconnect /ip4/104.131.131.82/tcp/4001/p2p/QmaCpDMGvV2BGHeYERUEnRQAwe3N8SzbUtfsmvsqQLuvuJ
  
  The disconnect is not permanent; if ipfs needs to talk to that address later,
  it will reconnect.


# ipfs swarm filters

USAGE
  ipfs swarm filters - Manipulate address filters.

SYNOPSIS
  ipfs swarm filters

DESCRIPTION

  'ipfs swarm filters' will list out currently applied filters. Its subcommands
  can be used to add or remove said filters. Filters are specified using the
  multiaddr-filter format:
  
  Example:
  
      /ip4/192.168.0.0/ipcidr/16
  
  Where the above is equivalent to the standard CIDR:
  
      192.168.0.0/16
  
  Filters default to those specified under the "Swarm.AddrFilters" config key.

SUBCOMMANDS
  ipfs swarm filters add <address>... - Add an address filter.
  ipfs swarm filters rm <address>...  - Remove an address filter.

  For more information about each command, use:
  'ipfs swarm filters <subcmd> --help'


# ipfs swarm filters add

USAGE
  ipfs swarm filters add <address>... - Add an address filter.

SYNOPSIS
  ipfs swarm filters add [--] <address>...

ARGUMENTS

  <address>... - Multiaddr to filter.

DESCRIPTION

  'ipfs swarm filters add' will add an address filter to the daemons swarm.


# ipfs swarm filters rm

USAGE
  ipfs swarm filters rm <address>... - Remove an address filter.

SYNOPSIS
  ipfs swarm filters rm [--] <address>...

ARGUMENTS

  <address>... - Multiaddr filter to remove.

DESCRIPTION

  'ipfs swarm filters rm' will remove an address filter from the daemons swarm.


# ipfs swarm peering

USAGE
  ipfs swarm peering - Modify the peering subsystem.

SYNOPSIS
  ipfs swarm peering

DESCRIPTION

  'ipfs swarm peering' manages the peering subsystem.
  Peers in the peering subsystem are maintained to be connected, reconnected
  on disconnect with a back-off.
  The changes are not saved to the config.

SUBCOMMANDS
  ipfs swarm peering add <address>... - Add peers into the peering subsystem.
  ipfs swarm peering ls               - List peers registered in the peering
                                        subsystem.
  ipfs swarm peering rm <ID>...       - Remove a peer from the peering
                                        subsystem.

  For more information about each command, use:
  'ipfs swarm peering <subcmd> --help'


# ipfs swarm peering add

USAGE
  ipfs swarm peering add <address>... - Add peers into the peering subsystem.

SYNOPSIS
  ipfs swarm peering add [--] <address>...

ARGUMENTS

  <address>... - address of peer to add into the peering subsystem

DESCRIPTION

  'ipfs swarm peering add' will add the new address to the peering subsystem as one that should always be connected to.


# ipfs swarm peering ls

USAGE
  ipfs swarm peering ls - List peers registered in the peering subsystem.

SYNOPSIS
  ipfs swarm peering ls

DESCRIPTION

  'ipfs swarm peering ls' lists the peers that are registered in the peering subsystem and to which the daemon is always connected.


# ipfs swarm peering rm

USAGE
  ipfs swarm peering rm <ID>... - Remove a peer from the peering subsystem.

SYNOPSIS
  ipfs swarm peering rm [--] <ID>...

ARGUMENTS

  <ID>... - ID of peer to remove from the peering subsystem

DESCRIPTION

  'ipfs swarm peering rm' will remove the given ID from the peering subsystem and remove it from the always-on connection.


# ipfs swarm peers

USAGE
  ipfs swarm peers - List peers with open connections.

SYNOPSIS
  ipfs swarm peers [--verbose | -v] [--streams] [--latency] [--direction]
                   [--identify]

OPTIONS

  -v, --verbose  bool - display all extra information.
  --streams      bool - Also list information about open streams for each peer.
  --latency      bool - Also list information about latency to each peer.
  --direction    bool - Also list information about the direction of connection.
  --identify     bool - Also list information about peers identify.

DESCRIPTION

  'ipfs swarm peers' lists the set of peers this node is connected to.


# ipfs swarm resources

WARNING:   EXPERIMENTAL, command may change in future releases

USAGE
  ipfs swarm resources - Get a summary of all resources accounted for by the
                         libp2p Resource Manager.

SYNOPSIS
  ipfs swarm resources

DESCRIPTION

  Get a summary of all resources accounted for by the libp2p Resource Manager.
  This includes the limits and the usage against those limits.
  This can output a human readable table and JSON encoding.


# ipfs tar

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs tar - Utility functions for tar files in ipfs.

SYNOPSIS
  ipfs tar

DEPRECATED SUBCOMMANDS
  ipfs tar add <file> - Import a tar file into IPFS.
  ipfs tar cat <path> - Export a tar file from IPFS.


# ipfs tar add

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs tar add <file> - Import a tar file into IPFS.

SYNOPSIS
  ipfs tar add [--] <file>

ARGUMENTS

  <file> - Tar file to add.

DESCRIPTION

  'ipfs tar add' will parse a tar file and create a merkledag structure to
  represent it.


# ipfs tar cat

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs tar cat <path> - Export a tar file from IPFS.

SYNOPSIS
  ipfs tar cat [--] <path>

ARGUMENTS

  <path> - ipfs path of archive to export.

DESCRIPTION

  'ipfs tar cat' will export a tar file from a previously imported one in IPFS.


# ipfs update

ipfs-update is an 'external' command.
It does not currently appear to be installed.
Please see https://github.com/ipfs/ipfs-update/blob/master/README.md#install for installation instructions.

# ipfs urlstore

USAGE
  ipfs urlstore - Interact with urlstore.

SYNOPSIS
  ipfs urlstore

DEPRECATED SUBCOMMANDS
  ipfs urlstore add <url> - Add URL via urlstore.


# ipfs urlstore add

WARNING:   DEPRECATED, command will be removed in the future

USAGE
  ipfs urlstore add <url> - Add URL via urlstore.

SYNOPSIS
  ipfs urlstore add [--trickle | -t] [--pin=false] [--] <url>

ARGUMENTS

  <url> - URL to add to IPFS

OPTIONS

  -t, --trickle  bool - Use trickle-dag format for dag generation.
  --pin          bool - Pin this object when adding. Default: true.

DESCRIPTION

  DEPRECATED: Use 'ipfs add --nocopy --cid-version=1 URL'.
  
  Add URLs to ipfs without storing the data locally.
  
  The URL provided must be stable and ideally on a web server under your
  control.
  
  The file is added using raw-leaves but otherwise using the default
  settings for 'ipfs add'.


# ipfs version

USAGE
  ipfs version - Show IPFS version information.

SYNOPSIS
  ipfs version [--number | -n] [--commit] [--repo] [--all]

OPTIONS

  -n, --number  bool - Only show the version number.
  --commit      bool - Show the commit hash.
  --repo        bool - Show repo version.
  --all         bool - Show all version information.

DESCRIPTION

  Returns the current version of IPFS and exits.

SUBCOMMANDS
  ipfs version deps - Shows information about dependencies used for build.

  For more information about each command, use:
  'ipfs version <subcmd> --help'


# ipfs version deps

USAGE
  ipfs version deps - Shows information about dependencies used for build.

SYNOPSIS
  ipfs version deps

DESCRIPTION

  Print out all dependencies and their versions.